说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 加镁
1.
Research and Production Practice of Extracting Magnesium Sintering in Adding Magnesian Lime
新钢配加镁质灰提镁烧结的研究与生产实践
2.
Research on the Effect of Magnesia-zirconia Powder and Environmental Protection Pitch on Properties of the Low Carbon MgO-C Brick;
加镁锆砂及环保沥青对低碳镁碳砖性能影响的研究
3.
High Purity Magnesia Preparation from Mg(HCO_3)_2 with Ethanol Addition
重镁水添加乙醇热解制备高纯氧化镁
4.
Addition of 10% ethanol to a Mg(NO_3)_2 and MgSO_4 solution results in an almost complete cry-stallization of magnesium sulfate.
加10%乙醇即可使硫酸镁与硝酸镁较好分离。
5.
Designation and composition of wrought magnesium and magnesium alloys
GB/T5153-1985加工镁及镁合金牌号和化学成分
6.
Influence of Wasted Direct Bond Magnesia-chrome Bricks Addition on the Properties of Magnesia-based Castable
废镁铬砖加入量对镁质浇注料性能的影响
7.
(2)The strength of castable containing MA spinel was better than that of the one contaning chrome ore.
(2)加入镁铝尖晶石的镁质浇注料在强度方面要好于加入铬矿砂的;
8.
Study on Increasing the Ignition-proof Temperature by Adding Zr into the Magnesium Alloy;
添加金属锆提高镁合金起燃点的研究
9.
Study on Plastic Deformation of AZ31 Magnesium Alloy Sheet;
AZ31B镁合金板材的塑性加工成型研究
10.
Study on Increasing the Ignition Point by Adding RE into the Magnesium Alloy;
添加轻稀土提高镁合金起燃点的研究
11.
Study on the Effective Separation and Fine Processing of Magnesium from Boron Slurry;
硼泥中镁的有效分离与精细加工研究
12.
Viscosity of AZ91D magnesium alloy melt with small additions of calcium
添加少量钙的AZ91D镁合金熔体的黏度
13.
Added Ways of Mistchmetal (MM) in Die-casting Magnesium Alloy
压铸镁合金中混合稀土加入方法研究
14.
Effects of Electrolyte Additives on the Performance of Micro-Arc Oxide Films on AZ91D Magnesium Alloy
添加剂对AZ91D镁合金微弧氧化膜的影响
15.
Effect of Wasted Magnesia-chrome Fine Powder Addition on Sintering Property of Magnesia-based Castable
废镁铬砖细粉的加入对镁质浇注料烧结性的影响
16.
And some calcite-secreting organisms also add magnesium to the mix.
有些分泌方解石的生物,会在分泌物中加入镁。
17.
Magnesium alloy wrought products--macrostructure--inspection method
GB/T4297-1984镁合金加工制品低倍组织检验方法
18.
Magnesium alloy wrought products--Microstructure--Inspection method
GB/T4296-1984镁合金加工制品显微组织检验方法