1.
Study on the Technologies of Variable Polarity Plasma Arc (VPPA) and Activating Flux TIG (A-TIG) for Magnesium Alloy Welding;
镁合金变极性等离子弧焊及活性化焊接研究
2.
The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化.
3.
Study on Mechanism of the Activating Flux Coated Wire for Magnesium Alloy Welding and Development Process
镁合金活性焊丝焊接机理研究及制备
4.
Joining Strength and Microstructure of Sintered SiC/SiC Joints Prepared by Active Brazing Process
活性钎焊法连接碳化硅陶瓷的连接强度和微观结构
5.
Study on Weldability and Microstructure of Brazing Cubic Boron Nitride;
钎焊立方氮化硼的焊接性与微观结构
6.
Microstructure and properties of Mg alloy joint by A-TIG and TIG
镁合金活性TIG焊与TIG焊的接头组织与性能分析
7.
Three-dimensional Numerical of CLAM Steel on TIG Welding
中国低活化马氏体钢TIG焊焊接的三维数值模拟
8.
Effect of activating fluxes on appearance of weld in thin plate electron beam welding of nickel-base super alloy GH4169
活性剂对GH4169薄板电子束焊接焊缝成形的影响
9.
Study on China Low Activation Martensitic Steel in Laser Weld
中国低活化马氏体钢的激光焊接研究
10.
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
11.
AN INVESTIGATION ON THE GASEOUS FLUORIDE IN WELDING FUME OF BASIC ELECTRODE
碱性焊条焊接烟气中氟化物气体的研究
12.
Stability of Double Wires Narrow-gap Gas Metal Arc Welding
双丝窄间隙熔化极气体保护焊的焊接稳定性
13.
Study on the Performance of TIG Welding Joint for 3.5Ni Steel
3.5Ni钢TIG焊焊接性能研究
14.
Influence of activating flux on undercut and fatigue property of welded joints
活性剂对焊缝咬边倾向及接头疲劳性能的影响
15.
Study of Activating Flux Coated Wire for Titanium Alloy and Research of Welding Technology for Ti31 Titanium Alloy Pipe;
钛合金活性焊丝的研制及Ti31管材焊接工艺的研究
16.
Development of an Activating Flux for TIG of Stainless Steel and Effect of Activating Flux on Plasma during CO_2 Laser Welding;
不锈钢TIG焊活性剂的研制及其对CO_2激光焊接等离子体的影响
17.
Numerical simulation of welding arc and surface-activating element on weld shape in TIG welding
焊接电弧与活性组元对TIG焊熔池形貌影响的数值模拟
18.
The welding conditions should always be neutral or slightly oxidizing.
焊接气氛必须永远保持中性或微氧化。