1.
Experimental research and prediction of yield strength for aging strengthened aluminium alloy
铝合金时效强化的实验研究及屈服强度计算
2.
Parametric Design and Research on Direct Calculation of Yielding and Buckling Strength for Deck Ship
大型甲板货船参数化设计与结构屈服屈曲强度直接计算研究
3.
Research on Direct Calculation of Yielding and Buckling Strength Based on CSR for Oil Tanker;
基于油船结构共同规范的屈服与屈曲强度直接计算研究
4.
Research on Direct Calculation of Yielding and Buckling Strength Based on CSR for Bulk Carriers;
基于散货船结构共同规范的屈服与屈曲强度直接计算研究
5.
"Yield strength 85Kg/mm2(120,000psi)maximum"
屈服强度最大85Kg/mm2(120000psi)
6.
The Influence of Steel Bar Yield Strength Error to Structure Design;
钢筋屈服强度的误差对结构设计的影响
7.
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
8.
Simple calculation of H-shaped section beam post-buckling strength
受弯H型面钢梁腹板屈曲后强度的简化计算方法
9.
Study on Increasing Yield Strength of Q345B Plate in JISCO;
提高酒钢Q345B板材屈服强度研究
10.
Research on dynamic yield strength of steel 30CrMnSiNi2A
30CrMnSiNi2A钢的动态屈服强度研究
11.
Analysis of Cracking During Stamping of 700MPa Grade Super High Strength Beam Steel
屈服强度700MPa级超高强度大梁钢冲压开裂分析
12.
Influence of strength of ferrite matrix on yield strength of granular structure steels
铁素体基体强度对粒状组织钢屈服强度的影响
13.
Stiffness and Strength Criteria for Design of Buckling-Restrained Braces
屈曲约束支撑设计的刚度与强度准则
14.
Effect of Heat Treatment System and Test Method on Yield Strength of LY12MCZ Alloy
热处理制度和试验方法对LY12MCZ屈服强度的影响
15.
Simplified calculation on length of line-contact of buckling-restrained brace
屈曲约束支撑线接触长度的简化计算
16.
Yielding strength is indicative of the stress at which plastic deformation begins.
屈服强度是指塑性形变开始发生时的应力。
17.
EXPERIMENT AND MODELING STUDY OF AGED ALU-MINIUM ALLOYS STRENGTHENING RESPONSE
铝合金时效-屈服强度的实验与模型化研究
18.
Effects of Heat-treatment Technology on the Yield-Strength of A356 Wheel by Low-Pressure Casting;
热处理工艺对A356低压铸造轮毂屈服强度的影响