1.
A medium frequency heated pushing elbow process based on even thickness wall elbow theory has been intro duced and a process parameters CAD system of medium frequency heated pushing elbows has been de-veloped.
介绍了基于等壁厚弯管理论的中频热推弯管新工艺及新开发的中频热推弯管工艺参数CAD系统。
2.
The Research on Forming Processes of Titanium Ring Pipe with Higher Strength
高强钛合金环形管热推弯曲工艺研究
3.
Research on the Law of Influence of Geometric Technology Parameters on Axis-Thrust Tube Bending Process;
几何工艺参数对热推弯管过程影响规律的研究
4.
Application of Numerical Simulation Technique in Pipe Push-bending
数值模拟技术在管材推弯成形中的应用
5.
Optimal design of technological parameters for hot-pushing pipe-bending based on virtual orthogonal experiment
基于虚拟正交试验的热推弯管工艺参数优化设计
6.
Calculation model of AFC lateral bending
刮板输送机横向推移弯曲段力学模型
7.
Shear force is implicit in the development of bending moments.
杆中的剪力在弯矩的推导中是不明显的。
8.
Derivation and Realization on the Stiffness Equation of Uniform Section Bending Bar
等截面弯曲杆件刚度方程的推导和认识
9.
A deduction method of normal stress fermula of unsymmetrical bending;
非对称弯曲正应力公式的一种推导方法
10.
Efficiently Controlling Fast Turn of Tactical Missile Vertical Launching
垂直发射快速转弯气动力/推力矢量控制研究
11.
The formulae for calculating the bend radius of neutral plane and the decrement of bend angle after springback were derived by considering the deformation after unloading.
依据卸载变形的分析计算，推导出回弹后中性层弯曲半径及弯曲角变化量的计算公式。
12.
Interlocked repulsorlift thrusters provide the Scimitar with exceptional maneuverability.
互锁的反重力推进器为弯刀型提供了无与伦比的机动性。
13.
This includes both the fundamental bending characteristics of the airframes and the propellant dynamics.
这包括飞行器结构的基本弯曲特性和推进剂动力学。
14.
The transverse No.1 Bridge of Japan is a bridge on slope and in curve with small radius and was installed by segmentally launching.
日本横向一号桥是一座采用顶推法施工的小半径弯坡桥。
15.
Another consequence was that in the warped space-time near a massive object, clocks would run more slowly.
另一个推论是：在有质物体近旁的弯曲时空中，时钟会走得比较慢。
16.
The Effects of Asymmetrical Stress on Spinal Growth and the Mechanism of Lateral-Pushing Correction of Scoliosis;
不对称应力对脊柱生长的影响及脊柱侧弯侧推矫正机制的研究
17.
Bend Stream-tube Method of Calculating the Hydrodynamic Performance of Cycloidal Propeller and Rotor;
计算摆线推进器和水轮机水动力性能的弯曲流管法
18.
Study on the Bending Fatigue Stress Limit of the ZY-1 Case-hardened Double-circular-arc Gear and Its Form Factor Deducing;
ZY-1型硬齿面双圆弧齿轮弯曲疲劳极限应力研究及齿形系数推导