1.
Effect of dysprosium on shape of β phase,homogenization treatment time and maximum reduction per rolling pass of AZ31 alloy
镝对AZ31合金β相形状、均质化处理时间及单道次最大轧制率的影响
2.
PRODUCTION PRACTICE OF ENHANCING EQUILIBRIUM RATIO OF THE MINUS-DEVIATION ROLLING IN THE HOT ROLLED ANGLE
提高热轧角钢负偏差轧制均衡率的生产实践
3.
Analysis on rolling stability of heavy section shrinkage cross wedge rolling
大断面收缩率楔横轧稳定轧制问题分析
4.
high moisture content measuring and controlling unit
高含水率控制装置（监控轧车轧余率或预烘后织物含水率等）
5.
Technology for Controlling Elongation on 1 500 mm Cold Rolled Skin Pass Mill in Angang
鞍钢1500mm冷轧平整机组延伸率控制技术
6.
Elongation Control Technique of Temper Mill for 1500mm Cold Rolling
1500mm冷轧平整机的延伸率控制技术
7.
The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.
结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。
8.
Application of Disc sheer on Φ20 and Φ22 Rolling Craftsmanship
圆盘剪在Φ20、Φ22轧制工艺上的应用——切除轧制缺陷,提高成材率和产量
9.
Elongation Stability Control of Strip by Skin-pass Mill in CAL
冷轧连续退火带钢平整延伸率稳定性控制
10.
Finite element simulation of rolling lead bullion with different hollow ratio
不同空心率铅锭轧制过程的有限元模拟
11.
close continuous mill
多机轧制的连续式轧机
12.
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形
13.
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
14.
Sirle-roll Drive and unegual Diameter Rolling for Cold Strip Mill
冷轧带钢轧机的单辊传动和异径轧制
15.
Study of Roller Vibration in Rolling Processes of Cold Tandem Rolling;
冷连轧机轧制过程中轧辊振动的研究
16.
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
17.
Influence of Cold Rolling Process on Plastic Strain Ratio of 1100 Aluminum Alloy Plates and Earring Ratio of Cup-shaped Parts
冷轧生产工艺对1100铝合金板塑性应变比与杯形件制耳率的影响
18.
The Determine of Rolling Mill Draught Pressure and Analysis of Stress-Strain in Rolling Process;
轧机轧制过程轧制压力的确定及应力应变分析