1.
The high-pressure vessel contour structure size optimization analysis based on SolidWorks simulation
基于SolidWorks Simulation对高压容器外形结构尺寸的优化分析
2.
Marine A.C low voltage switchboard-Construction and basic dimension
GB/T11803-1989船用交流低压配电板结构及基本外形尺寸
3.
" Cold forming sectional steel--Hollow sectional steel for general structure--Dimension, form, weight and permissible deviations"
GB/T6728-1986结构用冷弯空心型钢尺寸、外形、重量及允许偏差
4.
shape and dimension of refractory bricks for open-hearth furnace
平炉用耐火砖尺寸、外形
5.
The Optimization of the Dimensions of the Beam-and-girder Construction hy Means of Dynamic Programming
用动态规划方法优化肋形结构的截面尺寸
6.
Preparation of Low Dimensional Silver Nanostructures with Controllable Size and Morphology
尺寸与形貌可控的低维银纳米结构的制备
7.
A FRACTAL STUDY ON MESO STRUCTURES AND SIZE EFFECT OF METALLIC FOAMS
基于分形的泡沫金属细观结构与尺寸效应研究
8.
The insert condition, the strength of concrete and the space condition, the steel structure, its size and space Iocation.
(2) 支吊生根处的条件,混凝土强度及空间结构尺寸,钢结构的形状,尺寸及空间位置。
9.
Outline dimension series of infrared detectors
GB/T13583-1992红外探测器外形尺寸系列
10.
Application of Structural Topology, Shape and Size Optimization Method in the Design of Cable-stayed Bridge Girders;
结构拓扑、形状和尺寸最优化方法在斜拉桥加劲梁设计中应用
11.
Design of large cross-section block horns with slots for ultrasonic plastic welding
具有开槽结构的大尺寸立方形超声塑料焊接焊头的设计
12.
Note:The above parameters can be modified without separate notification,The schematic construction and dimension are only als reference.
注:以上参数如有更改恕不另外通知,图示结构和尺寸仅供参考。
13.
Series for printed boards outside dimension
GB/T9315-1988印制电路板外形尺寸系列
14.
" Spherical plain radial bearings, joint type-Boundary dimensions"
GB/T9163-1990向心关节轴承外形尺寸
15.
Rolling bearings accessories--Plummer block housings--Boundary dimensions
GB/T7813-1998滚动轴承附件轴承座外形尺寸
16.
Spherical plain thrust bearings-Boundary dimensions
GB/T9162-1990推力关节轴承外形尺寸
17.
Spherical plain bearing rod ends-Boundary dimensions and tolerances
GB/T4222-1991杆端关节轴承外形尺寸和公差
18.
Spherical plain bearing rod ends-Boundary dimensions
GB/T9161-1988杆端关节轴承外形尺寸