1.
Minimum Chip Thickness in Orthogonal Micro-cutting Based on Plasticity Strain Gradient Theory
基于应变梯度理论的正交微车削中最小切削厚度预测
2.
maximum sawing or filling thickness of work
工件锯割或锉削最大厚度
3.
Permeability of Cutting Fluid in Minimum Quantity Lubrication Precision Turning
最小量润滑精密车削中切削液的渗透性
4.
minimum cover of reinforcement
钢筋保护层的最小厚度
5.
minimum thickness of neck
缩颈的最小直径;颈部的最小厚度;颈部的最小厚度
6.
Influence of Undeformed Chip Thickness on Surface Roughness-Spectral Analysis of the Profile of Machined Surface
切削厚度对加工粗糙度的影响——已加工表面轮廓的谱分析
7.
(2) Cutting speed influents chip dimension.
(2)切削速度对切屑形状的尺寸大小有影响。
8.
The Influence Analysis on Micro Orthogonal Turn-Milling Cutting Speed to Chip Formation;
微小型正交车铣切削速度对切屑变形影响分析
9.
The effects of different cutting thickness on surface quality and slice quality are studied in this paper.
研究了不同切削厚度对竹材表面质量与屑片质量的影响。
10.
flat-surface grinding machine, numerically controlled 0.01mm minimum accuracy
数控平面磨削机,最小确度为0.01mm
11.
flat-surface grinding machine, not numerically controlled 0.01mm minimum accuracy
非数控平面磨削机,最小精确度为0.01mm
12.
Minimum thicknesses in rim and centre of lens
GB/T1205-1975透镜边缘及中心最小厚度
13.
Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel
超声硬切削45淬硬钢的切削温度研究
14.
Remove all bone from the cuts and slice pieces into uniform thickness and size(approximately 3 inches thick).
把这些牛肉块去骨并将其切成统一的厚度和大小(约3英寸厚)。
15.
Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
16.
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
17.
cut small bits or pare shavings from.
从……切下小点或削刮。
18.
micrometer cutting depth adjustment
千分表切削深度调整