1.
Investigation of SST k-ω Reliabilityin Impinging Jet Cooling
SST k-ω模型用于冲击射流冷却的可靠性
2.
Convective heat transfer characteristics of impingement cooling for a self-excited precessing jet
自激励旋进射流冲击冷却的对流换热特性
3.
Research on Cooling Method of Electronics Based on Jet Impingement
基于冲击射流的电子器件冷却方法研究
4.
Application Study on The Grinding Ti-6Al-4V of Jet Impinging Cooling both in & out to Pore Grinding Wheel
微孔砂轮射流冲击内外冷却技术在钛合金磨削中的应用研究
5.
Research on Heat Transfer Characteristics and Discharge Coefficient of Impingement/effusion Cooling System;
冲击/发散冷却换热特性及流量系数研究
6.
Numerical Study on Flow and Heat Transfer Characteristics of Impingment/Effusion Cooling Mode;
冲击—发散复合冷却流动与传热特性的数值研究
7.
Research on the Flow Characteristics of the Small Droplet Impingement Cooling with Thin Liquid Film;
微器件细小喷淋冲击冷却流场及形成的薄液膜特性研究
8.
Numerically simulating mist/steam impingement cooling with phase change
水雾/蒸汽相变冲击冷却的数值模拟
9.
A Study on Erosive Effect of Two Phase Impinging Jets on Vertical Plate
两相冲击射流对垂直挡板冲蚀的研究
10.
Numerical Investigations of the Effect of Particle Diameter and Carry Gas on Gas-particle Two-phase Impinging Velocity in Cold Spraying
粒径与载气等因素对冷喷涂气固两相冲击射流流场影响的数值模拟研究
11.
Experimental Research on Flow in the Efflux Element of the Hydro-efflux Hammer with PIV;
液动射流式冲击器射流元件流场PIV试验研究
12.
Experimental Study for Wake Vortices of an Impinging Jet in Crossflow
横流冲击射流尾迹涡结构的实验研究
13.
Flow Characteristics in the Short Channel with Staggered Impinging Jets Arrangement;
短通道错排射流冲击流动特性的研究
14.
The stilling basin base plate supports large impact pressure in the impacted area.
消能塘底板在射流冲击下,底板块在冲击区受到较大的冲击压力。
15.
Numerical Simulation and Experiment Research on the Effect of Rotation on Jet Impingement Cooling;
旋转条件下冲击冷却数值模拟及实验研究
16.
Numerical simulation on cooling effectiveness of combined impingement and film cooling
“冲击-气膜”复合式结构冷却效果数值研究
17.
Theoretical Analysis and Experimental Research on Grinding Jet for Cooling;
磨削射流冷却的理论分析和实验研究
18.
Design and Research of Refrigeration System for Cold and Hot Airflow Shock Chamber;
冷热气流冲击试验箱制冷系统研制与试验研究