1.
Research on Stress-Relief under Control and Creep Control of Soft Rock Roadway in High Stress;
高应力软岩巷道有控卸压与蠕变控制研究
2.
Study of the Control Technology for the Overloading Pre-compression and Unloading of Soft Road Base
公路软基超载预压卸载控制技术研究
3.
Study on Distortion Mechanism of Main Roadway Surrounding Rock under the Dynamic Pressure and the Release of Pressure Control;
动压影响下大巷围岩变形机理与卸压控制研究
4.
Automates compressor control including starting/ stopping/ loading/ unloading.
空压机自动控制包括开机,停机,加载,卸载.
5.
Practice on Relieving Shot Controlled by Borehole and Increasing Air Permeability Coefficient of Seam
钻孔控制卸压爆破增加煤层透气性系数的实践
6.
Analysis and Numerical Simulation on Relieving and Gas Permeability Effect of Cross Controlled Blasting
穿层控制爆破的卸压、增透作用分析及数值模拟
7.
The borehole must be drilled at correct place，and the gas pressure will be relieved.
没有卸不了压的瓦斯，只有打不到位的钻孔。
8.
The sealing disk may be removed, if necessary, by removing the screws connecting the keeper plate to the clapper.
如果有必要的话，可以通过拆卸将阀瓣连接到承座压板的螺丝来拆卸密封阀瓣。
9.
The machine is equipped with a hydraulic switch valve to ensure safety during loading and unloading workpieces.
工作台起动有液压开关阀，确保装卸工件时的安全性。
10.
Remove volt/amp tester.
拆卸电压/电流测试器。
11.
hydraulic hitch system with unloading function
卸荷式液压悬挂系统
12.
taper coordinated oil-pressure dismantler
锥度配合油压拆卸工具
13.
LOGISTRIP automatic system
油船自动装卸压载系统
14.
air driven rockerloader
压气式铲斗后卸装载机
15.
pressure regulator of engine unloading valve
发动机卸荷阀调压器
16.
cargo oil handling automatic control system
货油装卸自动控制系统
17.
Study on Design of Unloading System of Wood-based Panel Press
人造板热压机卸压机构的设计和研究
18.
Remove the high pressure choke and kill hoses from the slip joint.
从伸缩节上卸开高压放喷和压软管。