1.
Investigation on Magnesium Alloy Sheet Manufactured by Strip Casting and Downstream Rolling;
铸轧—二次轧制法制备镁合金薄板的研究
2.
The Downstream Rolling Process of Twin Roll Casting Magnesium Alloy Sheet AZ31B;
双辊铸轧AZ31B镁合金板坯的二次轧制工艺
3.
Study on Semi Steel Precision Roll after Crude Roll Pass and Second Heating Treatment
粗开孔型二次热处理精轧半钢轧辊的研制
4.
Studies on the alloy-tin couple for the double reduced tinplate
二次冷轧镀锡板的合金-锡电偶合研究
5.
Mechanical Properties and Texture Characteristic of IF Steel Containing Nb and Ti by Secondary Cold Rolling
Nb+Ti-IF钢二次冷轧性能和织构特征
6.
Reduction Pass Rolling in TM Finishing Mill Train of Laiwu Steel's Large H-beam Product Line
莱钢大H型钢生产线TM精轧机组减道次轧制
7.
FEM simulation of hot rolling process in the second pass considering dynamic recrystallization in the first pass
考虑一道次动态再结晶的二道次热轧仿真
8.
L2 Parameter Optimization of Short Stroke Control for Rough Rolling Edger on Hot Strip Mill
热连轧粗轧立辊短行程控制二级参数优化
9.
FEM Simulation of Second Hot Rolling Considering Microstructure Evolution during First Pass and Time Interval
考虑一道次及道次间隔期间组织演变的二道次热轧仿真研究
10.
Application of Laser Doppler Velocimetric Technology in DCR
多普勒激光测速技术在二次冷轧机组的应用
11.
Surface Properties of Double Reduced Tinplate and the Corrosion Resistance of Tinplate;
二次冷轧板表面性能与镀锡层耐蚀性研究
12.
Performance Study of Rehardened MC3 Deep Hardening Layer Cold Work Roll;
MC3深淬硬层二次淬火冷轧工作辊使用性能研究
13.
Study on Pretreatment of Waste Emulsion from Double Cold Rolling by Chemical Coagulation
化学破乳预处理二次冷轧废乳化液的研究
14.
The Discription of Level 2 Process System in Tandem-Pickling Production Line
酸轧联机酸洗二级过程控制系统概述
15.
The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.
结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。
16.
FEM Simulation and Optimization of Six Pass Cool Continuous Rolling Process of Wire and Bar Stainless Steel;
不锈钢线棒材六道次冷连轧轧制过程有限元仿真与优化
17.
Matex-colour roller system
智能型染色用二辊均匀轧车（具连续可变锥度的轧辊,控制色差较好）
18.
Design of Performance Management System for the Seconed Tianjin Roll Stell Limited Company;
天铁轧二制钢有限公司绩效管理系统设计