1.
Molding articles from wood particle for furniture
GB/T15105.1-1994模压刨花制品家具类
2.
Woodworking machines--Thickness planing machines with rotary cutterblock for one side dressing--Accuracy tests
GB/T14385-1993单面木工压刨床精度
3.
Properties and Marketization of Biaomass Presswood Pallet
生物质模压刨花托盘的研究及市场化
4.
Woodworking machines--Surface planing and thicknessing machines--Accuracy tests
GB/T14386-1993木工平压两用刨床精度
5.
Fragmentation Rebuild on Piston Rod of B690-1 Type Hydraulic Shaping Machine;
B690-1液压牛头刨床活塞杆断裂的修复
6.
Gas pressure in mat during hot-pressing process of flakeboard.
大片刨花板热压板坯内部气压变化的研究
7.
According to designed parameters, properties of Acacia products all exceeded national standard.
相思和桉树2树种的对比试验研究结果表明：相思刨花模压制品性能优于桉树刨花模压制品。
8.
Technology of Low-pressure Short-cycle Overlaying on Surface Deco- rated Particleboard with Paper Impregnated Thermosetting Resins
浸渍纸饰面刨花板低压短周期工艺的分析
9.
A Study on Internal-mat Conditions During Hot-pressing Process of Flakeboard;
大片刨花板热压过程中板坯内部环境变化研究
10.
Research on Performance Matching of Two-speed Hydraulic Chassis for Wheeled Milling Machine
轮式铣刨机双速液压底盘性能匹配研究
11.
Brief introduction the durable test of transmission system by two-side thicknessing planer for surfacing and thicknessing in one operation
浅谈平压两用木工刨床传动系统的耐久试验
12.
Correct Selection of Hot Presses for MDF and Particle Board
中密度纤维板和刨花板热压机的正确选用
13.
Study on the Variation Law of Temperature, Air Pressure and Moisture Content of Flakeboard during Hot-pressing;
大片刨花板热压过程中温度、气压和含水率变化规律研究
14.
BY6010A shaping machine
by60100a牛刨
15.
K1000 Series of Cold Milling Machines are pneumatic running and fully hydraulic driven.
K系列沥青路面铣刨机为轮胎行走、液压驱动型式。
16.
The temperature behavior within the Poplar flake-board mat during steam injection vacuum pressing( SIVP) was studied.
研究了喷蒸真空热压杨木大片刨花板坯内部的温度分布特征。
17.
Research on the Fundamentals of Internal Temperature Distribution and Factors Involved of Flakeboard During Hot Pressing;
刨花板热压过程温度变化规律及其影响因素的研究
18.
Effect of Pressing Parameters on Formaldehyde and Other TVOC Emissions from Particleboard
热压工艺对刨花板甲醛及其他有机挥发物释放总量的影响