1.
Effect of Temperature Gradient Cyclic Pressing on Densification of Spray Deposited SiC_p/7090 Aluminum Matrix Composite;
梯温楔压对喷射沉积SiC_p/7090铝基复合材料致密化的影响
2.
A New Process of Hydro-mechanical Deep Drawing for Magnesium Alloy Sheets at Gradient Temperature
镁合金板材液压梯温拉深成形新工艺
3.
wedge and plunger burster
楔与塞柱型液压冲破机
4.
Internal combustion engines--Piston rings--Keystone rings and half keystone rings
GB/T14223-1993内燃机活塞环梯形环和楔形环
5.
Finite Element Simulation and Analysis of Shaft Deformation by Cross Wedge Rolling;
楔横轧阶梯轴成形过程的有限元仿真与分析
6.
The Influence of In-situ Stress Gradient and Geothermal Temperature on The Calculation of Coalbed Gas Pressure
煤层温度和应力梯度变化对煤层瓦斯压力计算的影响
7.
Study on Fire Resistance of H-section Columns with Thermal Gradient Fireproof Measures of Steel Structure;
考虑温度梯度的H型钢压弯柱抗火分析及钢结构防火措施研究
8.
The Ultimate Load-Carrying Capacity in-Plane of Tapered Member;
楔形压弯构件平面内稳定极限承载力
9.
Technological Process and Die Design for the Belt Sheave
板制多楔皮带轮冲压工艺与模具设计
10.
Wedge-shaped Extrusion Resistance Analysis of Flat-pipe Belt Conveyor
扁管带式输送机的楔形挤压阻力分析
11.
A new technique to implement aluminum isothermal/equipressure extrusion technology--Research on technology application of gradient water-cooling for hot aluminum billet
一种实现铝材等温/等压挤压工艺的新技术——铝材热坯料梯度水冷工艺应用研究
12.
Influence of the Pressure-Viscosity Effect on the Characteristics of Spiral Oil Wedge Hydrodynamic Bearing
压黏效应对螺旋油楔动压滑动轴承特性的影响
13.
When the density step wedge has been properly exposed, the film is then processed.
当密度阶梯光楔被正确曝光后，即把胶片冲洗出来。
14.
The rate at which a physical quantity, such as temperature or pressure, changes relative to change in a given variable, especially distance.
梯度一个物理量，如温度或压力，相对于另一给定可变量（尤指距离）的变化的变化率
15.
Numerical Simulation on Wedge Deformation of Spray-deposited 5A06 Aluminum Alloy;
喷射沉积5A06铝合金楔压变形的数值模拟
16.
Study on the Densification Process of Spray-deposited 5A06 Aluminum Alloy by Wedge Pressing;
喷射沉积5A06铝合金楔压致密化工艺的研究
17.
Out-of-plane Stability Analysis of Tapered I-sectioned Beam-columns with Slender Web;
楔形宽薄腹工形截面压弯构件平面外稳定分析
18.
Local Buckling and Post-Buckling Strength of Tapered Member;
楔形压弯构件的局部屈曲及屈曲后强度