1.
The characteristics of dew condensation in the inner wall and their influence factors were analyzed based on the establishment of physical and mathematical models.
本文进一步研究了舱内通风对壁面结露特性的影响,建立了合理的物理模型和数学模型。
2.
a ceramic or mural decoration made by scratching off a surface layer to reveal the ground.
一陶器和墙壁装饰由擦掉表面层露出地板得到。
3.
Study on the Temperature Change of the Ring Path of the Internal Surface of the Frozen Wall after Moldings
砌壁后冻结壁内表面环向温度变化特征分析
4.
Some Problems in the Research of the Mechanism of Frost Formation
冷壁面上结霜机理研究中的几个问题
5.
dewfall:The formation of dew.
结露:露水的成形.
6.
MOVE THE DEW-POINT METER AND IMMEDIATELY CHECK UP THE INSIDE SURFACE OF INSULATING GLASS HAVE NOT ANY DEW OR FROST.
移开露点仪，立刻观察玻璃试样的内表面上有无结露或结霜。
7.
Dynamic model of coherent structure by local disturbance in wall region of a turbulent boundary layer
近壁湍流边界层壁面局部扰动诱导形成相干结构的动力学模型
8.
Application of Elastic-plastic Inherent Strain Method by FEM on the Welding of a Thick Spherical Bulkhead
弹塑性固有应变法在厚壁球面舱壁结构焊接中的应用
9.
Turbulent BL Structure: Wake, Wall layers. Inner, Outer Variables. Effects of Roughness.
紊流边界层结构：尾流，壁面层，内、变数。粗糙度效应。
10.
The Influence to Tunnel Fires Simulation with Different Wall Boundary Condition;
不同壁面边界条件对隧道火灾模拟结果的影响
11.
Lateral Buckling Analysis of Thin-Walled Structures with Irregular Cross Section;
不规则横截面形状薄壁结构的横向稳定分析
12.
Experimental Study on Coherent Structure of Turbulent Boundary Layer in Smooth Open-Channel Flow;
光滑壁面明渠紊流边界层拟序结构实验研究
13.
Slippery Mold Construct of Internal Shaft Lining in Freezing Shaft on Large Sectio Thick Surface Soil
大断面深厚表土层冻结井筒内层井壁滑模施工
14.
EXPERIMENTAL STUDY ON STRUCTURE PARAMETER OPTIMIZING OF MICRO-COMBUSTOR WITH PENETRATION COMBUSTION
壁面渗透燃烧微燃烧器结构参数优化实验研究
15.
A 12-Node Hexahedral Generalized Conforming Element for 3-D Analysis of Thin-Walled Beams
薄壁梁空间分析的六面体十二结点广义协调元
16.
Microstructure investigation for the interface of electric resistance welded Cu/Al thin walled tube
薄壁铜铝管电阻焊焊接界面的微观结构研究
17.
A Study of the Axial Crashworthiness of Thin-walled Straight Beams with Different Shapes
不同截面结构薄壁直梁的轴向耐撞性研究
18.
Research on Structure Optimization of Axial Crashworthiness of Thin-Walled Rectangular Beam
矩形截面薄壁梁轴向耐撞性的结构研究