1.
STUDY ON EFFECTS OF SINTERING PARAMETERS ON STRENGTH OF Al_2O_3 CERAMIC CAST
烧结工艺对氧化铝陶瓷铸型强度的研究
2.
The Interfacial Reaction Law and Micromechanism between Titanium Alloy Melts and Ceramic Mould;
钛合金熔体与陶瓷铸型界面反应规律及微观机理研究
3.
The result shown that the technology is convenient to operate, suitable to make ceramic mould for single casting.
结果表明：该种工艺方法操作简便，适合于形状较简单的陶瓷铸型的制作。
4.
In this paper, the technology of ramming ceramic mould using loose mixture with aluminium phosphats colloid as binder was researched, and pouring experiment was also made.
研究了以磷酸铝为粘结剂配制松散料，捣制陶瓷铸型的工艺方法，并进行了浇注试验。
5.
Production of Hollow Investment Casting Components with Ceramic Mold Core Free
代替陶瓷型芯生产空心铸件的精铸工艺
6.
Study of Ceramic Decision Casting, Microstructures and Properties of Magnesium Alloys
镁合金陶瓷型精密铸造工艺及组织性能研究
7.
INTERFACE REACTION BETWEEN CERAMIC MOULDS AND Ti46Al1B AS-CAST VALVES
陶瓷壳型面层材料与Ti46Al1B阀门铸件的界面反应
8.
Ceramic Mould Precision Casting Technology of Magnesium Alloy and Interface Reaction
镁合金陶瓷型精密铸造工艺及界面反应的研究
9.
The alcohol in the mold must be fired up immediately to avoid fissure.
然后用硅酸乙酯水解液作为粘结剂，灌制出陶瓷型铸型。
10.
cylindrical mould (excl. of graphite or other carbon and of ceramics), for centrifugal moulding machines
离心铸模机圆柱型模（石墨或其他碳化物及陶瓷的型模除外）
11.
Study on Filling Performance of Alumina Based Ceramic Cores for Investment Casting Super Alloy Blades;
高温合金叶片铸造用氧化铝陶瓷型芯充型性能的研究
12.
Study on Technology of Investment Cast for Titanium Alloy Using Low Cost Oxide Ceramic Mould Shell;
钛合金低成本氧化物陶瓷型壳熔模精密铸造技术研究
13.
The Investigation of ZrO_2 Ceramic Molding and Composite Ceramic
ZrO_2陶瓷成型工艺和复合陶瓷的研究
14.
method of physical test for plaster of paris mold for pottery
陶瓷铸模用石膏物理试验方法
15.
Structure and Properties of SiC/Gray Cast Iron Composite Material
SiC陶瓷/灰铸铁复合材料的组织与性能
16.
Experience of application of IPS e.max Press-heat pressed ceramic in all-ceramic restorations
IPS e. max Press热压铸陶瓷的临床应用体会
17.
Laser Alloying of Ductile Iron Surface Coated with Sub-Micron Ceramics
球墨铸铁表面激光亚微米陶瓷合金化
18.
mould for metals or metal carbides (excl. ingot and linotype moulds and injection or compression-type moulds; excl. moulds of graphite or other carbon and of ceramics)
金属或金属碳化物用型模（锭模及莱诺铸排机型模,石墨或其他碳化物及陶瓷用型模除外）