1.
Effects of welding parameters on weld shape of laser-MIG hybrid welding of AZ31 magnesium alloy
工艺参数对AZ31镁合金激光-MIG复合焊缝成形的影响
2.
Fundamental study on hybrid laser beam and resistance seam welding (LB-RSW)
激光束—电阻缝焊(LB-RSW)复合焊接研究
3.
Technologies of Composite Bonds of Al_(18)B_4O_(33w)/Al Composites by Ultrasonic Brazing;
Al_（18）B_4O_（33w）/Al复合材料超声钎焊焊缝复合化工艺
4.
Numerical Simulation of Weld Formation in Laser+GMAW-P Hybrid Welding
激光+GMAW-P复合热源焊焊缝成形的数值模拟
5.
Fundamental Study on Hybrid Laser Beam-Resistance Seam Welding(LB-RSW)
“激光束—电阻缝焊”复合焊接方法基础研究
6.
Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31
AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响
7.
The control algorithm of welding seam tracking based on composite FYZZY-PID
复合FUZZY-PID焊缝跟踪控制算法
8.
Effects of Welding Current on Laser-MIG Hybrid Welding of Aluminum-Lithium Alloy
焊接电流对铝锂合金激光-MIG复合焊焊缝成形的影响
9.
Study of Laser-Arc Hybrid Welding and the Magnetic Properties of Laser Welded Super-Low Carbon Steel;
激光电弧复合焊接及激光焊接超低碳钢的焊缝磁性能研究
10.
Cause Analysis of Weld Crack on 20R+410S Clad Plate Head and Its Repair Technology
20R+410S复合板封头焊缝裂纹原因分析及修复工艺
11.
The Machine and Welding Characteristics of Laser-Resistance Seam Hybrid Welding for Titanium Alloy T-Joint
钛合金T型接头激光—电阻缝焊复合焊接装置及特性研究
12.
Effect of Welding Parameter on Weld Shape in Fiber Laser-MIG Hybrid Welding of Titanium Alloy
光纤激光-MIG复合焊参数对钛合金焊缝成形的影响
13.
Effect of Ti-Al alloy on microstructures of weld in plasma arc ‘in-situ’ welding of SiC_p/6061Al MMCs
Ti-Al合金对SiC_p/6061Al复合材料等离子弧焊焊缝组织的影响
14.
Weld Seam Edge Detection Based on Composite Edge Detectors
基于复合边缘检测算子的焊缝边缘提取方法
15.
Researches on the High Temperature Creep Deformation of the Weld Seam Interfaces of Pressure Vessels of Clad Steel Plates
复合钢板压力容器焊缝界面高温蠕变研究
16.
Influences of Welding Parameters on Weld Appearance in Laser-plasma hybrid Welding
激光-等离子电弧复合焊接参数对焊缝成形的影响
17.
Study on the effect on welding seams by the welding parameters of laser hybrid welding process based on the stepwise regression
基于逐步回归法研究激光复合焊接工艺参数对焊缝的影响
18.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。