1.
Research on the Intelligence Diagnostic Equipment for TPIM Aluminum-rotor Fault;
TPIM转子铝条故障智能诊断装置的研究
2.
This article introduces a new method to detect the rotor bar of motors.
文章介绍了一种检测三相笼式异步电动机转子铝条性能的新方法,电磁感应旋转法。
3.
The squirrel-cage winding consists of aluminium or copper bars embedded in the rotor slots and shorted at both ends by aluminium or copper ends rings.
鼠笼型绕组由铝或者铜制的金属条嵌入转子的槽内并用铝或者铜制的环在两端短路。
4.
A new fast track of aluminium industry development-A joint management of coal-basedelectric power and electrolytic aluminium industries;
实施“煤电铝”联营走出了一条加快铝工业发展的新路子
5.
EQUATION OF STATE AND ELECTRONIC TRANSFER FOR Al, Cu, Pb AND Ta UNDER ULTRAHIGH PRESSURES
高压下铝、铜、铅、钽的状态方程和电子转移
6.
SEDIMENTARY FACIES AND PALAEOGRAPHY WITH OREFORMING CONDITIONS OF BAUXITE IN TAIZI RIVER BASIN OF CARBONIFEROUS-PERMIAN IN EASTERN LIAONING
辽东太子河流域石炭—二叠纪岩相古地理及铝土矿成矿地质条件
7.
Study of the Emission Spectra of Aluminum Laser-induced Plasma under Different Conditions;
不同条件下激光诱导金属铝等离子体的发射谱研究
8.
air way slits in rotor
转子上的条形风力分级孔
9.
The Spline Penalty Subdomain Methods for Stress Analysis of Combinative Shells of Revolution
用于组合旋转壳分析的样条罚子域法
10.
Research on Rotor Broken Bar Fault Diagnosis of Induction Motor
感应电机转子断条故障诊断方法研究
11.
Initial Conditions for Solving Coupled Differential Equations of Motion of Fuze Ball Rotors
引信球转子运动方程求解的初始条件
12.
The Study of On-line Supervision in Squirrel Cage Induction Motors with Broken Bar;
异步电动机转子断条检测系统的研究
13.
Sturm-Liouville Operators with Transmission Conditions and Eigenparameter-Dependent Boundary Conditions
带有谱参数和转移条件的Sturm-Liouville算子
14.
Aluminium and aluminium alloy wires for welding purpose
GB/T3197-1982焊条用铝及铝合金线材
15.
OPTIMIZATION OF TRANSFECTION CONDITIONS FOR TRANFECTING TF SIRNA TO HEK-293 CELLS MEDIATED BY CATIONIC LIPOSOME
优化阳离子脂质体介导的组织因子小干扰RNA转染HEK-293的转染条件
16.
Combination of Al_3Ti and NiAl by Ion Beam Methods;
离子束法合成钛铝、镍铝合金的研究
17.
If the technological conditions are well adjusted in aluminium electrolysis, the production using low molecular ratio electrolyte can achieve high efficiency and low energy consumption.
在铝电解生产中只要调整好工艺条件，采用低分子比生产是能够实现高效低耗的。
18.
The drawn sliver is fed between sets of rollers each of which rotates faster than the one behind it.
熟条从罗拉之间喂入,沿条子的前进方向,罗拉的转速逐渐提高。