1.
Fracture Analysis of Breaker Bolt of Baosteel 1580PC Rolling Mill;
宝钢1580PC轧机安全螺栓断裂分析
2.
a safety harness, bolt
安全带、 保险螺栓.
3.
Install the seat/shoulder belt anchor bolt.
安装座椅/安全肩带系紧螺栓。
4.
Remove the relief valve cover bolts while holding the cover down.
边压住阀盖，边拆卸安全阀阀盖螺栓。
5.
Performance of Germany-made Fastening Bolt and Safety Analysis
德制紧固螺栓的性能跟踪与安全性分析
6.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
7.
LOWER TRACK BAR BOLT INSTALLATION
下横拉杆螺栓的安装
8.
Lower Ball Stud Remove/Install
上圆顶螺栓拆卸/安装
9.
The holes for the Bolts register perfectly.
螺栓的孔眼完全合适。
10.
Secure the controller to the floor/base plate with bolts and washers and tighten.
用螺栓和垫圈,将控制装置安全地紧固在地面/底板上。
11.
The Research on Safe Reliability Evaluation of 12%Cr-steel High-temprature Bolt Based on Accelerated Creep Rupture Test
基于加速蠕变断裂试验的12%Cr钢高温螺栓安全可靠性评价研究
12.
Joint-axis Bolt Stretch Value of the Turning Wheel of Three Gorges Right Bank Hydropower Station and Safety Factor Analysis
三峡右岸电站转轮联轴螺栓伸长值取值及安全系数分析
13.
The method is also proposed on making thread-hole and bolt in interving concerted process, bolt connection as well.
干涉配合螺接过程中螺孔和螺栓的加工方法以及螺栓的安装方法。
14.
Hexagon head bolts-Full thread-Product grade C
GB/T5781-1986六角头螺栓--全螺纹--C级
15.
Hexagon head bolts-Fine pitch thread-Full thread-Product grades A and B
GB/T5786-1986六角头螺栓--细牙--全螺纹--A和B级
16.
Hexagon head bolts-Full thread-Product grades A and B
GB/T5783-1986六角头螺栓--全螺纹A和B级
17.
The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve.
安全阀阀盖应该采用不锈钢螺栓紧固，应该采用四分之一转锁定连接来所定安全阀的弹簧负载。
18.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"