1.
Distributor Engaged Position—5L 4-Cylinder Engine
分电盘啮合位置—5L 4-汽缸引擎
2.
over and under chain gear
内外啮合链传动装置
3.
The indexing pawl advances a fastener into operative engagement with the feed pawl upon movement of the second canister portion from the open position to the closed position.
当第二筒部从打开位置移动到关闭位置时,分度棘爪使紧固件前进并使其与进给棘爪工作啮合。
4.
Research on the Cycloid Bevel Gear Meshing Characteristic and Processing Device
摆线锥齿啮合特性及加工装置的研究
5.
A projecting piece on a revolving or rocking part in a mechanism that transmits motion to the part it engages.
转臂机械装置中转动或摇动部分上的凸出部分,用来把另一机体移到啮合部位
6.
Performance Analysis of Gear Drive with Equivocal Modification Meshing beyond Pitch Point;
等变位节点外啮合齿轮传动性能分析
7.
a gear with a small number of teeth designed to mesh with a larger wheel or rack.
带有少量齿轮啮合大车轮和车架的装置。
8.
Research and analysis on the performance of the screw feeding device of cold feeding rubber extruder
冷喂料挤出机螺旋啮合喂料装置的性能分析与研究
9.
To join or attach by means of a joggle.
榫接,啮合用啮合扣或接榫连接或安装
10.
A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact
考虑延长啮合时齿轮副啮合刚度模型
11.
Press the cowl top trim panel down until the snap clip retainers engage in the top of the instrument panel.
向下压仪表板顶部饰板,直至夹扣定位器啮合到仪表板顶部。
12.
Gear A, at the end of the drive shaft, and gear B, on the countershaft, are in constant mesh.
齿轮A位于驱动轴的末端,齿轮B在副传动轴上,它们恒定啮合。
13.
The structure and principle of reciprocating positioning chain are introduced, and the meshing process is analyzed also.
介绍循环定位链传动的结构及工作原理,并分析啮合过程。
14.
Modification Coefficient Selection of the Involute Internal Gear with Zero-tooth-difference Mechanism and Machining Method;
零齿差内啮合齿轮副变位系数的选择及加工方法研究
15.
The engagement of gear teeth.
啮合齿轮的互相咬合
16.
You must engage the clutch.
你必须使离合器啮合。
17.
the gears are engaged; meshed gears; intermeshed twin rotors.
齿轮啮合在一起;啮合齿轮;啮合在一起的成对转子。
18.
Solution of meshing track of new silent chain with inner-outer compound meshing mechanism
新型内-外复合啮合齿形链啮合迹线的求解