1.
ANALYSIS ON FLEXURAL CAPACITY AND DUCTILITY OF STEEL REINFORCED ULTRAHIGH TOUGHNESS CEMENTITIOUS COMPOSITE BEAMS
钢筋增强超高韧性水泥基复合材料梁的弯曲承载力及延性分析
2.
Distortional Buckling Strength and Interaction Bending Capacity of Flexural Cold-Formed Lipped Channels
受弯的冷弯卷边槽钢畸变屈曲强度和其相关屈曲承载力
3.
Finite Element Analysis of Derrick Bearing Capacity with Bending Bar
含弯曲杆件的井架承载能力有限元分析
4.
RANALYSIS OF STABLE BEARING CAPACITY OF STEEL FRAMES WITH SEMI-RIGID CONNECTION AND ORIGINAL CURVATURE
考虑初弯曲的半刚接钢框架稳定承载力分析
5.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
6.
Probability of Flexural Fatigue and Straight-resistance of Steel Fiber Reinforced Prestressed Concrete Slab;
预应力钢纤维混凝土板的弯曲疲劳性能及正截面承载力计算
7.
Nonlinear Bending Analysis of Simply Supported Plates with Immovable Edges by Using the Perturbation Differential Quadrature Method;
承受均匀载荷的固定夹紧板的非线性弯曲的摄动DQ解
8.
As one of several strength-governing modes, distortional buckling is receiving more attentions.
作为控制冷弯薄壁型钢承载能力的几种屈曲模式之一，畸变屈曲正逐步受到重视。
9.
Influence of Training with Secondary Load on Bending Fatigue Strength of Cranksh aft
次载锻炼对曲轴弯曲疲劳强度的影响
10.
Cold-Formed Steel Unlipped Channels Subjected to Concentrated Bearing Load;
冷弯薄壁非卷边槽钢承受集中荷载时的承载力
11.
The limit bending capacity of a round-corner-rolled crankshaft is measured with the testing machine.
利用该试验机对日本大发公司生产的经过圆角滚压处理的曲轴的极限承载弯矩进行了测试。
12.
Research on Flexural Capacity of Cold-formed Thin-wall Steel-Concrete Composite Beam;
冷弯薄壁型钢—混凝土组合梁抗弯承载性能研究
13.
testing method for stiffness of paper by bending load
纸的弯曲负载下刚性试验方法
14.
Experiment and Theory Study on Incremental In-Plane Bending;
非连续加载面内弯曲实验与理论研究
15.
Bending Calculation of Bimodulous Circular Plate under Concentrated Loads
集中载荷作用下双模量圆板弯曲计算
16.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
17.
Simulate experimental study on bending bearing capacity of the colour steel sandwich panel
彩钢夹芯板受弯承载力模拟试验研究
18.
Study on Stability Capacity of Aluminium Beam-Columns;
铝合金结构压弯构件稳定承载力研究