1.
Experimental Research on Ⅰ-Ⅱ Mixed-Mode Fracture of 45 Steel;
45钢材料Ⅰ-Ⅱ复合型断裂的实验研究
2.
The Experimental Study on Ⅰ-Ⅱ Mixed Mode Crack in Concrete by Means of Photoelastic Coatings;
光弹贴片法实验研究混凝土Ⅰ-Ⅱ复合型断裂
3.
Experimental Investigation on Initial Cracking Criterion for Ⅰ-Ⅱ Mixed in Concrete
混凝土Ⅰ-Ⅱ复合型断裂起裂准则的试验研究
4.
Numerical Simulation and Experimental Verification of Brittle Fracture for Mixed Ⅰ-Ⅱ Type of V-notch;
Ⅰ-Ⅱ复合型V型切口脆性开裂的数值模拟与实验验证
5.
Ⅰ-Ⅱ Mixed-mode crack stress intensity factor of the finite element calculation and analysis
Ⅰ-Ⅱ复合型裂纹的应力强度因子有限元计算分析
6.
Propagation criterion for mixed mode Ⅰ-Ⅱ crack propagation and numerical simulation of the whole propagation process
混凝土Ⅰ-Ⅱ复合型裂缝扩展准则及扩展全过程的数值模拟
7.
Experimental Investigation on Initial Cracking Criterion and Numerical Simulation of Crack Propagation for Ⅰ-Ⅱ Mixed Mode in Concrete;
混凝土Ⅰ-Ⅱ复合型裂缝起裂准则的试验研究与裂缝扩展过程的数值模拟
8.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
9.
AN EXPERIMENTAL STUDY OF MIXED-MODE Ⅰ-Ⅱ DYNAMIC FRACTURE OF MARBLE
大理岩Ⅰ–Ⅱ复合型动态断裂的实验研究
10.
Calculation of Plane Ⅰ、Ⅱ Mixed-mode Stress Intension Factors with Thermal Weight Function Method
基于热权函数法的平面Ⅰ、Ⅱ型复合应力强度因子计算
11.
Advances on Class Ⅰ and Ⅱ of the Swine Leukocyte Antigen
猪白细胞抗原复合体Ⅰ类和Ⅱ类研究进展
12.
It is shown that the singularity of the strain field at the crack tip is smoothed in non-local theory.
根据基于不同形式权函数的非局部理论，分析了Ⅰ-Ⅱ型复合裂纹尖端的应变场。
13.
Peng's pancreaticogastrostomy--Comparative study on types Ⅰ and Ⅱ procedures (with types Ⅲ and Ⅳ appended)
彭氏胰胃吻合术——Ⅰ型与Ⅱ型的比较(兼论Ⅲ型和Ⅳ型)
14.
Fatigue crack growth under I-III mixed-mode loading
基于Ⅰ-Ⅲ复合型疲劳裂纹扩展的研究
15.
The Effect of Gukang on Expression of Collagen Type Ⅰ、Ⅱ and CTGF in the Healing Process of Osteoporositic Fracture;
骨康对骨质疏松性骨折愈合过程Ⅰ、Ⅱ型胶原及CTGF表达的影响
16.
Detection of norovirus genotype I and Ⅱ in diarrhea case samples by real-time RT-PCR assay
一起诺如病毒Ⅰ、Ⅱ型混合感染引起的感染性腹泻疫情调查
17.
Three-dimensional Finite Element Analysis of the First Permanent Mandibular Molar with Class Ⅰ Composite Restorations;
Ⅰ类洞型复合树脂修复后的三维有限元分析
18.
The Distribution Law of the Materials in the Compound Extruding of Cupplng-Cupping Bar(Ⅱ)
杯—杆型复合挤压的材料分配规律(Ⅱ)