1.
external interrupt processor
(计算机) 外部中断处理器
2.
Interrupt HandlingThe kernel's interrupt handling code is almost all microprocessor (and often platform) specific.
中断处理核心的中断处理代码总是与微处理器结构相关。
3.
Research on High-Reliability Timer and Interrupt Controller of Microprocessor;
高可靠微处理器定时器及中断控制器研究
4.
Design and Verification the Mechanism of Inter-interrupt Handled of X Microprocessor;
X微处理器内部中断处理机制设计与验证
5.
Code that the processor jumps to on receipt of an interrupt request.
使处理器跳转到中断请求接收的编码。
6.
Implementing Interrupt in Nios Systems;
软核处理器Nios系统中断实现机制
7.
Interrupt Design in VxWorks Based on S3C44B0X
基于S3C44B0X处理器的VxWorks中断设计
8.
Investigation of Parallel Calculation for Numerical Simulation of Interruption Characteristic of SF_6 Circuit Breaker;
高压SF_6断路器开断特性数值模拟中的并行处理
9.
The Application of Duo-Core in Power Transformer Fault Information Remote Wireless Diagnosis
处理器在变压器故障远程无线诊断中的应用
10.
An interruption of a program that is triggered by the processor" s own internal hardware.
一个由处理器内部硬件触发的程序中断。
11.
A microprocessor will check for interrupts at the end of every instruction.
微处理器将在每一个指令末尾检查有无中断。
12.
Application of NIOS Ⅱ Soft Kernel Processor in Ultrasonic Diagnostic System;
NIOS Ⅱ软核处理器在超声诊断系统中的应用
13.
Design and Verification of X Microprocessor s Programmable Interrupt Control System;
X微处理器可编程中断控制系统的设计与验证
14.
Analysis and solution of the anti-bouncing circuit on 220 kV circuit breakers
220kV断路器防跳回路中异常问题分析及处理
15.
Network overhead on a server consists of network interrupt handling, protocol header processing and data copies.
服务器上的网络开销包括中断处理、协议报头处理和数据副本。
16.
Application of DSP in Transformer On-Load Tap-Changer Monitoring and Diagnosis System
数字信号处理器在变压器有载分接开关监测与诊断中的应用
17.
Discussion on the Air Leak of SF6 Combined Electrical Apparatus and High-voltage Circuit-breakers
SF6组合电器及高压断路器漏气的处理
18.
handler interrupt service section
处理程序中断服务区