1.
The Study on Computer Control System of Multitemperatual Zones Refolw Soldering;
多温区回流焊计算机控制系统的研究
2.
Clear how to measuring reflow and wave profile.
清楚怎样测量回流焊和波峰焊温度曲线。
3.
The most obvious is the necessity for increased reflow temperature.
最明显的是，使用无铅锡膏必须提高回流焊温度。
4.
Software design of reflow soldering temperature measurement system based on VB
基于VB的回流焊温度测试系统软件设计
5.
Does the product Temperature Profile meet the reflow requirements for the SMT components according to the component manufactures?
产品的温度曲线是否符合零件制造商提供的SMT零件回流焊要求?
6.
If too much solder is use, it may flow past tube and clog seating area.
如果采用太多的焊料，则焊料可能流过管道并阻塞密封区域。
7.
Research on Multi-Temperature Control of Cyclic Total Reflux Batch Distillation
循环全回流间歇精馏多温控制的研究
8.
The influence of SMT reflow soldering temperature curve on the welding quality
SMT再流焊温度曲线对焊接质量的影响
9.
ORS Over Reflow Soldering
再流回焊接，SMT元件的焊接方式
10.
Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint
回流焊对SnAgCu焊点IMC及剪切强度的影响
11.
EVOLUTION OF SECOND PHASE IN 2.25Cr-1Mo-0.25V STEEL WELD METAL DURING HIGH TEMPERATURE TEMPERING
2．25Cr-1Mo-0．25V钢焊缝中第二相高温回火转变
12.
On the Adjustment of Infrared re-welding Temperature Curve
红外再流焊焊接温度曲线的调整与探讨
13.
At least3 years in design/ quality improvement for product such as re-flow oven, wave solder machine.
至少3年以上回流焊、峰焊设计与质量改进经验。
14.
Effect of Cooling Rate on Quality of Solder Joints in Lead-Free Reflow Soldering;
无铅回流焊冷却速率对焊点质量的影响
15.
Effect of reflow soldering on the IMC and shear strength of Sn-0.3Ag-0.7Cu-xBi/Cu solder joints
回流焊对SnAgCuBi/Cu焊点IMC及剪切强度的影响
16.
Numerical Simulation of the Effects of Welding Processes on Temperature Field of GMAW Surfacing Weld Zone
焊接工艺对GMAW堆焊焊缝区温度场影响的数值模拟
17.
The Design and Development of the Electrical Control System for SMT Solder-reflow Machines;
SMT回流焊设备电控系统的设计开发
18.
Development of precise inverter reflow-soldering power supply with waveform control
波控逆变式精密回流焊接电源的研制