1.
Show scanner driver dialog before scanning
在扫描前显示扫描仪驱动程序对话框
2.
(This scanner will always display the scanner driver dialog.)
(扫描仪将始终显示扫描仪驱动程序对话框。)
3.
Design and Realization of the Driver Program of Multi-CCD Scanner;
多CCD大幅面扫描仪的驱动程序设计与实现
4.
"Unable to access scanner device. Make sure scanner drivers are installed correctly, and no other scanning applications are running.
"无法访问扫描仪设备。请确定扫描仪驱动器安装正确，并且没有运行其它扫描应用程序。
5.
The compressed volume file for drive %1 cannot be found. Check drive %2 for errors using ScanDisk.
找不到驱动器 %1 的压缩卷文件，请用“磁盘扫描程序”扫描驱动器 %2。
6.
ScanDisk did not find any errors on this drive.
“磁盘扫描程序”在此驱动器没有找到任何错误。
7.
Unable to connect to scanner or camera. Check the connection and reinstall driver if necessary.
无法连接到扫描仪或照相机。请检查连接状态，如有必要，请重装驱动程序。
8.
Quit ScanDisk, free some space on this drive, and then restart ScanDisk.
请退出“磁盘扫描程序”，释放部分驱动器空间，然后重新启动“磁盘扫描程序”。
9.
ScanDisk found errors on this drive and fixed them all.
“磁盘扫描程序”在此驱动器上找到错误并全部修复。
10.
ScanDisk found errors on this drive but did not fix all of them.
“磁盘扫描程序”在此驱动器找到错误，但是并未全部修复。
11.
ScanDisk found errors on this drive but did not fix any of them.
“磁盘扫描程序”在此驱动器找到错误，但是并未修复任何错误。
12.
ScanDisk was unable to completely correct this error because this drive does not have enough space.
因为这个驱动器空间不够，所以“磁盘扫描程序”无法彻底更正错误。
13.
then run ScanDisk again and choose to conduct a standard test on the drive.
然后再运行“磁盘扫描程序”，在驱动器运行标准测试。
14.
Scanner paper jam. The current image transfer to the application will be canceled. Please clear the paper tray and retry the scan.
扫描仪出现塞纸现象。当前的图像至应用程序的传送将被取消。请检查扫描仪，重新扫描。
15.
The Design and Implementation of the Base Layer Driven Software for a Large Scale CIS Scanner;
大幅面CIS扫描仪底层驱动软件的设计和实现
16.
ScanDisk may be able to repair the damage if you perform a thorough test of this drive and its host drive now.
如果您对这个驱动器及它的主驱动器进行完全测试，“磁盘扫描程序”就可以修复受损的区域。
17.
ScanDisk may be able to move the unreadable portion of the compressed drive to a valid location on the host drive.
“磁盘扫描程序”可以将压缩过的驱动器，其中无法读取的部分，移到主驱动器的有效位置。
18.
compiler scanner
编译程序的扫描程序