1.
Research of machining mechanism and pattern of compound ultrasonic and electrosparking by robot;
机器人超声电火花复合加工机理研究
2.
A new kind of device has been developed, by which hybridtechnology of ultrasonic and WEDM is performed.
开发了一种超声电火花线切割复合加工装置。
3.
Interference Prediction in the Automatic Ultrasonic EDM Compound Processing of the Mould Curved Surface
自动超声电火花复合加工模具曲面的干涉预报
4.
Array Electrodes and Array Holes Machine Techniques by Ultrasonic Enhanced Micro EDM;
阵列轴孔的微细超声电火花复合加工技术研究
5.
Application of ultrasonic EDM compound processing in mould manufacturing
超声电火花复合加工在模具制造中的应用
6.
Study on the Surface Roughness of Ti-alloy in Ultrasonic Combined Electro-discharge Machining(EDM)
超声电火花复合加工钛合金表面质量研究
7.
The Mechanism and Tests of Ultrosonical Combined Electrical Micro-machining
超声复合微细电火花加工机理与试验
8.
Research on the use of the ultrasonic motor in the three-dimensional micro-EDM system
超声波电机在三维微细电火花加工中的应用
9.
Research on the Deep Micro Holes Machining by EDM with USM in Inverted Layout
倒置式电火花超声复合加工深微孔的研究
10.
Design of Miniaturized EDM Mechanism with an Ultrasonic Direct Drive Electrode
超声波直接驱动电极的小型电火花加工装置的设计
11.
Study on the New Combined Machining Technology and Mechanism of Ultrasonic Vibration Assisted Electrical Discharge Machining in Gas Medium;
超声振动—气体介质电火花复合加工技术及机理研究
12.
The Optimized Research of Technics on Super-large Thickness Machining Technology of WEDM
超大厚度电火花线切割工艺优化研究
13.
electric ignition
电火花点火,电气点火
14.
Develop of Ultra Short Pulse Generator for Micro-EDM;
微细电火花加工超短脉宽脉冲电源的研制
15.
Research on the Machine Tool of Electrical Discharge Milling Nonconductive Superabrasives
非导电超硬材料电火花铣削机床的研究
16.
Pulse power supply with pico-joule energy for micro-EDM machining
皮焦级超微能电火花加工电源技术研究
17.
Designs of Charge and Discharge Circuit Systems in Underwater Sparker Acoustic Equipment;
水下电火花声源装置中充放电回路系统的设计
18.
Research on Super-large Thickness Machining Technology of WEDM;
电火花线切割超大厚度切割技术的研究