1.
Blast Furnace Burden Control System Based on PLC;
基于PLC的高炉槽下配料控制系统
2.
An Instance of Technical Renovation of Automatic Control System with the Material Feeding via the Trough Bottom for the No.1 Blast Furnace;
高炉槽下上料自动控制系统技改一例
3.
Application of WinCC Configuration Software in Blast Furnace Proportioning Control System
WinCC组态软件在高炉槽下配料系统中的应用
4.
The Study of Data Communication System in the Blast Furnace Automatic Loading Based on CANbus;
基于CANbus的高炉槽下数字称重自动上料数据传输系统研究
5.
On the Application of PLC and Configuration Software in the Blast Furnace Proportioning System;
PLC和组态软件在高炉槽下配料控制系统中的应用研究
6.
The Fault Diagnosis of Transmission Gearbox of Distributor Chute on Blast Furnace Top;
高炉炉顶布料溜槽传动齿轮箱故障诊断分析
7.
Simulation Real Time Monitoring System of 2800m~3 Blast Furnace
模拟实时监控在2800m~3高炉槽上的应用
8.
Measurement of Material Flow Heap Top Position in Blast Furnace with Mensuration of Horizontal Trough
水平料槽测定法测定高炉料流堆尖位置
9.
The Braking Control of the Tilting Chute Motor
高炉布料溜槽倾动无抱闸电机的精确控制
10.
Application of Higt-voltage Inverter in Dust Removal Fan for 1080m~3 Blost Furnace Ore Trough
高压变频装置在1080m~3高炉矿槽除尘风机上的应用
11.
Startup Practice of No.2 Blast Furnace of Nibo Iron and Steel Co.,Ltd. under Abnormal Condition
宁钢2号高炉异常情况下的开炉实践
12.
A gutter under the eaves of a roof.
水槽屋檐下的凹槽：
13.
BEHAVIOUR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS UNDER ELEVATED TEMPERATURES
高强冷弯薄壁卷边槽钢柱在高温下的性能
14.
Application of high pressure jet grouting pile in groove wall reinforcement of diaphragm wall
高压旋喷桩在地下连续墙槽壁加固中的应用
15.
blast-furnace cinder
高炉矿渣, 鼓风炉炉渣
16.
The latter property is important because pieces of coke are necessary to permit uniform gas flow through the burden as it softens and melts in the lower region of the furnace.
后一个特性很重要，因为当炉料在高炉下部软化时，必须有焦块才能使炉气均匀地透过炉料。
17.
Used for injection between cooling walls and furnace shell.
用于大中型高炉炉体冷却壁与炉壳之间的压入灌浆，常用于炉身下部。
18.
Under the load of high basicity occur three circular crevices from top to bottom at the furnace hearth parallel to the furnace shell.
在高碱度负荷下，该高炉炉缸部位产生了平行于炉壳的至上而下的三条环裂。