说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 管纱卷绕成形
1.
Research of Motion Control System Used in Cop Shaping up by Convolution of Spinning Frame;
细纱机管纱卷绕成形运动控制系统的研究
2.
The thin layer is attenuated, twist is inserted, and the resulting yarn is wound onto bobbins.
纤维薄层被拉细,加捻,形成的细纱被卷绕到筒管上。
3.
A slight amount of twist is imparted to give strength. The strand, called roving, is laid onto a bobbin.
条子上加上了弱捻以便使其具有一定的强度,形成的纱条称为粗纱,被卷绕到筒管上。
4.
To be twisted or whorled into curved forms.
卷绕被卷绕成弯曲的形状
5.
There are spinning frames in existence which package filling yarn directly on quills rather than ring tubes.
目前的细纱机,有的可以直接将纱线卷绕在纬管上,而不是卷绕在细纱管上。
6.
If the yarn is to be used as filling in shuttle looms it must be repackaged on a quill.
如果纱线用作有梭织机的纬纱,则必须重新卷绕在纬管上。
7.
Cop:a cone-shaped or cylindrical roll of yarn or thread wound on a spindle.
管纱,纬管:一种绕在纺锤上的圆锥形或圆柱形纱团或线团.
8.
A cone-shaped or cylindrical roll of yarn or thread wound on a spindle.
管纱,纬管一种绕在纺锤上的圆锥形或圆柱形纱团或线团
9.
To twist or curl into a wreathlike shape or contour.
做成环状缠绕、卷曲成环的形状或轮廓
10.
To prevent the distortion, a right- hand and a left- hand twisted single are combined to form a balanced yarn.
为了防止纱线的变形,将具有不同捻向的两根单纱并合在一起,可以制成平衡纱线或不卷缩纱线。
11.
Thus physically wrapping the yarn around the package during winding should be avoided. The yarn is wound on the package by only rotating the package.
因此,在卷绕过程中不应使纱线围绕卷装回转,而是通过回转卷装将纱线卷绕上去。
12.
To wind(thread or yarn) onto a quill.
将(线或纱)绕在纡管上
13.
The yarn is now ready to be put on a suitable package in the winding zone.
最后纱线进入卷绕区,并被卷绕到一个合适的卷装上。
14.
Yarn rolls easily.
纱线很容易被绕成球状
15.
One that winds, especially a textile worker or machine that winds cloth or materials.
卷线者,卷纱机做卷绕工作的人或物,尤指卷绕衣料或材料的络纱工或机器
16.
Study on the Way of Sending Clean Air to Bobbin Yarn to Eliminate the Foggy Yarn in Spinning Department
防治细纱管纱形成“煤灰纱”的洁净送风方式的研究
17.
A traversing mechanism winds the strand on to the forming cake.
有一个排线机构把原丝卷绕在成形丝饼上。
18.
Experimental research of spiral winding technology for outward radial toothed motor core
电机外径向齿铁心螺旋卷绕成形工艺试验研究