1.
The Research on the Non-contact Detecting System Used for the Degrees of Differential High and Parallel in Locomotive;
机车轴瓦高出度及平行度非接触检测系统的研究
2.
Principle and Theoretic Analysis about the Load Checking of Half Bearing's Nip
轴瓦半径高出度加载检测法的原理及其设计计算
3.
Automatic measurement system on the axis wall height and opposite side parallelism
轴瓦半径高度及对边平行度自动检测系统
4.
Usually, tungsten bush is used to be the thrust bearing in water power plant, but it is easy burned down since its high temperature during its operation.
水电厂的推力轴瓦，已往多采用钨金瓦，它在运行中温度偏高，容易发生烧瓦事故。
5.
Causes and countermeasures on the over temperature of the bearing bush of hydrogen compressor in cyclohexanol plant
环己醇装置氢气压缩机轴瓦温度超高原因分析及对策
6.
IKO Needle Bearings、 Linear Motion Products, FAG Super Precision Bearings, DAIDO Dry Bearings, NOK Oil Seals.
专业代理IKO滚针、线导轨,FAG高精度系列、规系列,DAIDO轴瓦,油封等进口轴承。
7.
Babbits are known as the superior bearing metal in anti-friction property,butsince their lower fatigue strength,bearing of these metals are apt to crack and spalling,whenthey serve in high load condition.
巴氏合金是减摩性最好的轴承材料,但是其疲劳强度低,在高载荷下轴瓦合金层容易开裂剥落。
8.
Calculation of Dynamic Stress and Fatigue Strength of Crankshaft with Bush Deformation Included
计入轴瓦变形的曲轴动应力和疲劳强度计算
9.
Mooney and Ewart viscometer
穆尼-爱瓦特同轴圆筒旋转粘度计
10.
Low Ni High Mn Cu-Al Alloy Bush for Hot Plate Mill
低镍高锰铜铝合金轴瓦新材料的研究
11.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
12.
Prediction on Gas Emission and Gas Drainage base on Elevation
根据标高预测瓦斯涌出量和瓦斯抽放
13.
By comparing on the manufacturing technology of the sliding bearing in different works, a new manufacturing technology is given so as to improve on the gluey condition of babbit of the sliding bearing.
比较不同工厂滑动轴瓦的制造工艺，提出新的工艺，从而改善滑动轴瓦锡基轴承合金的粘合情况。
14.
By checking the large hanging type asynchronous motor for the gluey condition of babbit of the sliding bearing, a quality problem of the bearing is found.
通过检查大型悬挂式异步电动机滑动轴瓦锡基轴承合金粘合情况，找出轴瓦存在的质量问题。
15.
boring machine for connecting rod and cylinder block bush
连杆瓦及缸体轴瓦镗床
16.
Experimental Study of Scale Effect on Gas-saturated Coal Samples subjected to Uniaxial Compression
含瓦斯煤单轴压缩的尺度效应实验研究
17.
Multipoint measurement system for the thickness of bearings based on laser micro-displacement
基于激光微位移的轴瓦厚度多点检测系统
18.
Research and Application of Four-oil Wedge Bush in Electric Blower of Blast Furnace
四油楔轴瓦在高炉电动鼓风机上的研究与应用