说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 低剪切速率
1.
Study on Melt Viscosity of PP and FEP/PP Blends at Low Shear Rates
PP及FEP/PP低剪切速率下熔体粘性研究
2.
INFLUENCE OF SILICA NANOPARTICLES ON THE COALESCENCE OF IMMISCIBLE PDMS/PIB BLENDS UNDER LOW-RATE SHEAR FLOW
纳米SiO_2对PDMS/PIB不相容共混物在低剪切速率下凝聚行为的影响
3.
Studies on the Mechanics Behaviour of Joints under Different Shearing Velocity;
不同剪切速率下节理的力学特性研究
4.
Determination of viscosity of coatings at a high rate of shear
GB/T9751-1988涂料在高剪切速率下粘度的测定
5.
The apparent viscosity at the point decreases distinctly with shear rate increasing.
随着剪切速率的增加,转相点的视粘度明显下降.
6.
Effects of Shear Rate on Mechanical Behavior of Structured Loess
剪切速率对结构性黄土力学性状的影响
7.
Impact of shear rate on microstructure of PA 6/PP blends
剪切速率对PA 6/PP共混物微观结构的影响
8.
low shear measuring system
低剪切测定法(印花糊料)
9.
A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate
聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
10.
Study on the Law of the Influence of Temperature and Shear Rate on Viscosity of Yanchang Crude Oil
温度及剪切速率对延长原油粘度的影响规律研究
11.
Research on the Rational Shearing Speed of High-speed Precision Shearing for Metal Bar
金属棒料高速精密剪切适宜剪切速度的研究
12.
Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting
高速切削4Cr5MoSiV1钢形成的绝热剪切带
13.
Because the highly swollen granules break easily, the viscosity quickly decreases with only moderate shear. Starches are often modified before use in foods.
因为高度溶胀的颗粒容易破裂,只需中度剪切粘度会迅速降低。淀粉经常改性后再应用于食品。
14.
Formation mechanism and elimination of heavy sparks with the 3~# high-speed flying shear
3号飞剪高速剪切大火花的成因及解决办法
15.
Cause Analysis of Big Spark of Motor of Flying Shear at High Speed Cutting and Its Countermeasures
飞剪高速剪切时大火花的成因及解决办法
16.
The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.
剪切应力数值与其产生应变速率的比值叫粘性,用来衡量非晶材料抵抗永久变形的能力。
17.
Research into High Efficiency and Low Wire Wear Machining Technology of WEDM-HS;
高速走丝电火花线切割高效率低损耗加工技术研究
18.
Research on spatial simulation method of soil equivalent shear wave velocity
土层等效剪切波速空间模拟方法研究