1.
The Engaging Load and Axial Modification of Helical Gear Used in Increasing Gearbox of Wind Turbine Generator;
风机增速器斜齿轮啮合载荷及齿向修形的研究
2.
Study of Distribution Law of Dynamic Load along the Line of Action in Gear Transmission;
齿轮传动动载荷沿啮合线分布规律的研究
3.
Calculation of Meshing Stiffness and Research on Tooth-Race Load Distribution for Herringbone Gear
人字齿轮啮合刚度计算与齿面载荷分布研究
4.
Take the reduction of transmission error of gear and the fluctuation magnitude of meshing rigidity as the judging criterion and at the same time ensuring the variation of loading to be a smooth transition.
以减小齿轮传动误差和啮合刚度的波动大小为衡量标准，同时确保载荷变化呈平稳过渡。
5.
Calculation of dynamic torque acted on external gear pump considering relief groove and trapped oil pressure
考虑困油和卸荷的外啮合齿轮泵动态转矩计算
6.
Precise simulation analysis of relief area of external spur-gear pump
外啮合齿轮泵卸荷面积的精确仿真分析
7.
Theoretical and Experimental Research on Loaded Meshing of Involute Cylinder Worm-drive;
渐开线圆柱蜗杆传动承载啮合理论与实验研究
8.
FE Analysis on Contact During the Meshing Process of Heavy-load Marine Helical Gears
船用重载斜齿轮啮合过程接触有限元仿真分析
9.
Study on Meshing Analysis and Meshing Control of Double-enveloping Hourglass Worm-gearing Affected by Misalignment Errors and Load-dependent Deformation
制造误差与承载变形耦合条件下平面二次包络环面蜗杆的啮合分析与啮合控制研究
10.
Established Formulas for Trapped-oil Area and Relief-load Area of External Spur-gear Pump
外啮合齿轮泵困油面积和卸荷面积计算式的建立
11.
Investigation on Meshing Theory and Load Capacity of High Performance Unsymmetric Gear with Double Pressure Angles;
高性能双压力角非对称齿轮传动啮合机理及承载能力研究
12.
Multi-tooth Meshing Situation and Bearing Capacity Analysis of Big Cone Angle Skew Bevel Gears
大锥角斜齿锥齿轮多齿啮合状况及承载能力分析
13.
To join or attach by means of a joggle.
榫接，啮合用啮合扣或接榫连接或安装
14.
A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact
考虑延长啮合时齿轮副啮合刚度模型
15.
Research on Load Transfer Behavior and Deformation Rule of Stiff Pile Composite Ground under Embankment;
路堤荷载下刚性桩复合地基的荷载传递性状与变形规律研究
16.
Discussing the Way of Loading Test Determine Bearing Capacity of Composite Foundation of Cement-Soil Mixed Piles
载荷试验确定粉喷桩复合地基承载力的探讨
17.
IDENTIFICATION OF BENDING MOMENT LOADINGS RESULTING IN CRACK DAMAGE OF CLUTCH CASE
导致离合器壳体破裂的弯矩载荷识别
18.
A COUPLED ELEMENT ANALYSIS OF WAVE LOAD ON BODY WITH ARBITRARY SHAPE
任意形状物体波浪载荷的耦合元分析