1.
The form of distortion of work piece was studied, and the software rectification method of three coordinates measurement data was pot forward accordingly.
研究了工件的变形形式，并依此提出三坐标测量数据的软件矫正法。
2.
Software Develop of Form Error Evaluation Based on Coordinate Measuring Datas;
基于坐标测量数据的形状误差评定软件包的开发
3.
Software Develop of Position Error Evaluation Based on Coordinate Measuring Datas;
基于坐标测量数据的位置误差评定软件包的开发
4.
Gear Measing and Data Evaluating System Based on Coordinate Measurement;
基于坐标法的齿轮测量数据评价系统
5.
Development of the Data Acquisition System for Articulated Arm CMM
关节臂式坐标测量机数据采集系统的研制
6.
The Research of Data Commuication between CMM and the Platform of Manufature Information
坐标测量机与制造信息化平台数据通讯的研究
7.
The Data Collection System Development for PCMM;
智能关节式坐标测量机数据采集系统的研制
8.
Design of Distributed Coordinate Measurement Software Based on Database Management System;
基于数据库的分布式坐标测量软件的设计
9.
The Method for Measuring the Feature Line Based on the Three-dimension Measuring Apparatus;
基于三坐标测量仪的特征线数据采集方法
10.
Research of Articulated Arm-cmm's Data Acquisition System
关节臂式坐标测量机数据采集系统的研究
11.
The development of the temperature data acquisition system of the flexible coordinate measuring machine
柔性坐标测量机的温度数据采集系统的研制
12.
Realization on MATLAB for the Data Processing of Roundness Error Base on the Coordinate Method
基于坐标法测量圆度误差数据处理的MATLAB实现
13.
semilog data plot
实测数据的半对数坐标曲线图
14.
The Research of the Application System of CMM Based on the Network Database Technology
基于网络数据库技术的三坐标测量机应用系统研究
15.
It rely on CMM mainly to gather the data at the present.
国内外现阶段，完成数据采集主要依赖接触式三坐标测量机。
16.
Application System of CMM Based on Network Database Technique
基于网络数据库技术的空间坐标测量机应用系统研究
17.
It can be applied to deal with the measured data of spatial straightness obtained by three coordinate measuring machines (CMM).
可用于二坐标测量机等测量系统的空间直线度误差测量的数据处理。
18.
Under Microstation V8 vector data's Coordinate Conversion Routine Realizes
Microstation V8下矢量数据的坐标转换程序实现