1.
Simulations of Plasma Etching Based on Diffusion Limited Erosion Model
基于扩散限制刻蚀模型的等离子体刻蚀模拟研究
2.
Modeling and Simulation for Inductively Coupled Plasma Etching of Silicon in MEMS Fabrications;
MEMS加工中电感耦合等离子体（ICP）刻蚀硅片的模型与模拟
3.
Mechanism Analysis of the Pulsed Electrochemical Machining(PECM),Polishing(EP) and Micromachining(EMM) Based on a Capacity Model
基于电容模型的脉冲电解、电化学光整、蚀刻加工机理分析
4.
etchings, woodcuts, lithographs;
蚀刻、木刻、平版画；
5.
a method of etching that imitates the broad washes of a water color.
一种模仿水彩冲洗的蚀刻方法。
6.
Specification of DIP lead frames produced by etching
GB/T15877-1995蚀刻型双列封装引线框架规范
7.
Research on Etching GaN、P-type Ohmic Contact and Fabrication of GaN LED;
GaN的刻蚀、P型欧姆接触以及LED的研究
8.
Mechanism of Corrosion Resistence of GFRP and Its Experimental Model
GFRP腐蚀性能演变规律及腐蚀经验模型
9.
Serveral of commonly used methods are photoprinting, photoengraving, mechnical engraving, and stencil.
通常所采用的几种储存方法是：影印法、照相蚀刻、机械雕刻和模板。
10.
Multilayer Dielectric Gratings: In-situ Monitoring of Duty Cycle of photoresist Mask and Ion-Beam-Etched Groove Depth;
介质膜光栅：光刻胶掩模占宽比和离子束刻蚀槽深的监控
11.
Fabrication of 2D Photonic Crystal Templates by Holographic Lithography and Soft Lithography;
基于全息光刻及软刻蚀技术制备二维光子晶体模板
12.
Etching Mechanism and Pattern Size Controlling Method in Imprint Template Fabrication for MEMS
MEMS压印模板制作的刻蚀机理及尺寸控制方法
13.
gas discharge etching
气体放电蚀刻[法]
14.
laser engraving, laser etching
激光雕刻，激光蚀刻
15.
a block that has been etched or engraved.
一块被蚀刻或雕刻的板。
16.
Modeling on Chloride-induced Corrosion of Steel in Concrete;
氯离子侵蚀条件下混凝土中钢筋锈蚀模型研究
17.
To cut into the surface of(glass, for example) by the action of acid.
蚀刻用酸蚀刻（玻璃的）表面
18.
Experimental Research on the Characteristics of the CrMo Steel by Etch Solution;
蚀刻液对CrMo钢蚀刻特性的实验研究