1.
Research and Development on Sheet Metal Bending Parts CAPP System;
冲压弯曲件CAPP系统研究与开发
2.
Effect of bending angle on hydroforming of curved hollow components
弯曲角度对弯曲轴线件内高压成形的影响分析
3.
Study on elastic distortional buckling of lipped channel beam-columns
卷边槽钢压弯构件弹性畸变屈曲研究
4.
Local Buckling and Post-Buckling Strength of Tapered Member;
楔形压弯构件的局部屈曲及屈曲后强度
5.
Effect of Hot Stamping on Flexural Fatigue Property of QSS400 Axle Housing Steel
热冲压加工对QSS400桥壳钢弯曲疲劳性能的影响
6.
Plasticity in the suppression techniques such as stamping, bending, flanging, such as tensile plate.
适用于可塑性的压制工艺，如冲压、弯曲、翻边、薄板拉伸等。
7.
Experimental Research on the Effect of Length of Piezoelectric Bender on its Characteristics
压电弯曲元件的长度对其特性影响的实验研究
8.
Bending of thick rectangular plates with adjacent simply supported,one fixed and one free edges under hydrostatic pressure
静水压力作用下复合边界条件厚矩形板的弯曲
9.
Influence of the thickness of piezoelectric and elastic layers on the bender element characteristic
压电及弹性层厚度对弯曲元件特性影响的研究
10.
Finite Element Analysis of Distortional Buckling of Cold-formed Thin-walled Lipped Channel Beam-column;
冷弯薄壁卷边槽钢压弯构件畸变屈曲有限元模拟
11.
The Theoretic Research and Optimization of Surface Parts Stamp Forming;
曲面零件冲压成形的理论研究与优化
12.
Optimization of Process Parameters for Surface Parts Stamp Forming;
曲面冲压件成形工艺参数的优化研究
13.
Buckling and Bending Control of Functionally Gradient Thin Elastic Plate Boned Piezoelectric Patches;
具有压电元件的功能梯度弹性薄板的屈曲与弯曲控制
14.
This series pressing machine can be widely used in the technologies of drilling, losing materials, cutting, bending, shaping and light extension etc.
本系列压力机可广泛应用于冲孔、落料、切断、弯曲、成形、浅拉伸等工艺。
15.
Bending deformation：The component bends in one side after welding.
弯曲变形：构件焊后朝一侧弯曲的变形。
16.
Study on Dynamic Buckling of Axial Compression Member under Impact Load
冲击荷载作用下轴心受压构件动力屈曲研究
17.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
18.
Discussion about"Analysis of Correlation Curves between the Axial Force of Eccentrically Pressed Member with Rectangular Cross Section and the Bending Force Moment;
关于“矩形截面偏心受压构件轴力——弯矩相关曲线分析”的探讨