1.
Method to Analyze Wrinkled Membranes by Using Local Coordinate Transpose and Equivalent Stiffness
褶皱膜的局部坐标系转置和刚度等效法分析
2.
Damage identification approach of frame structure based on equivalent shear stiffness
等效剪切刚度的框架结构损伤识别方法
3.
A Method of Calculating Equivalent Stiffness of Wire-Rope Isolators
钢丝绳隔振器等效刚度的一种分析计算方法
4.
Research in simulation of frequency variety and equivalent algorithm for metal helical spring stiffness
螺旋钢弹簧刚度频变仿真及等效算法研究
5.
Computing Methods of the Equivalent Stiffness of the Interior Bracing and the Penetration Depth in Rock of Rock-Socketed Piles for Deep Excavation
深基坑内支撑等效刚度及嵌岩支护桩嵌岩深度计算方法研究
6.
A simple and accurate method for the stiffness evaluation of the spring interface elements used in delamination simulations
简单而准确的脱层分析弹簧界面元等效刚度计算方法
7.
Application of equivalent stiffness pillar method to calculating the single hinge bent structure with varying span
用等效刚度柱法求具有跨变的单层铰接排架结构
8.
CALCULATING FORMULAS FOR EQUIVALENT STIFFNESS AND STABILITY OF CURVED BAR SIMPLY SUPPORTED AT BOTH ENDS
两端简支弯曲杆件的等效刚度、稳定性计算公式
9.
Methods of Determining the Equivalent Support Stiffness of Brace Fram for Deep Excavation;
深基坑平面支撑框架等效刚度的研究和计算
10.
Analysis on Influencing Factors for Computing the Equivalent Stiffness of the Interior Bracing of Deep Excavation by Numerical Method
深基坑内支撑等效刚度数值计算影响因素分析
11.
Calculation of Equivalent Stiffness of Assist Motor Column and Gear Box of EPS Based on FEA
基于有限元分析的EPS助力电机轴等效刚度确定
12.
Equivalent modal method for the transverse vibration control of rigid cable
刚性拉索横向振动控制的模态等效方法
13.
The element stiffness matrix and the equivalent nodalloads are derived, and the formulas for calculating internal forces and disp-lacements under three typical loads are given.
推导了单元刚度矩阵、等效结点荷载,并给出在等刚度段内三种典型荷载下的计算公式。
14.
Calculating Methods of Semi-rigid Steel Frame′s Effective Length Coefficient
半刚性钢框架柱有效长度系数的计算方法
15.
constant rate full-elliptic spring
等刚度椭圆形板弹簧
16.
Stiffness Matrix and Equivalent Node Load Formulae or Varying Cross-section Spatial Beam Elements;
变截面空间梁单元刚度矩阵及等效结点荷载公式
17.
Development of Arboresence Pipe Network Stress Analysis Based on the Equivalence Rigidity Method
基于等值刚度算法管道应力分析系统开发与研究
18.
Analysis Method for Lightweight Material Substitution Design of Thin-walled Structures with Equal Stiffness
基于等刚度条件的薄壁结构的一种材料替代轻量化设计分析方法