1.
Research on the Power Spinning of Cone Parts with Discontinuous Wall Thickness Using 3D FEM and Experimental Investigation;
突变壁厚锥形件强力旋压成形有限元模拟和试验研究
2.
Thickness distribution at the deforming zone of aluminum tube in mechanical expanding
铝管锥形模机械扩径变形区壁厚分布规律
3.
Stamping process and design of die for shouldered taper part with inequal wall thickness
不等壁厚带台阶锥形件冲压成形工艺与模具设计
4.
Analysis and Numerical Simulation of Cold Extrusion Forming Process on Thin-walled and Cone-shaped Part;
薄壁方锥形件冷挤压变形过程的分析及数值模拟
5.
Study on Forming Conditions for One-Operation Deep Drawing in Conical Part of Thin Wall;
薄壁锥形件一次拉深成形极限条件研究
6.
Numerical Simulation and Experiment on Hydroforming of Cone-box Shaped Part with Differently Slope Side Walls;
具有不同锥度侧壁的浅锥盒形件液压成形的数值模拟与实验研究
7.
The ironing process with thinning in wall thickness and reducing in diameter
壁厚变薄直径缩小空心件的变薄拉深
8.
The Research of Instrument for Measurement of Wall-thickness and Wall-thickness Difference of Thin-wall Parts of Variation Curvature Revolving Body;
变曲率回转体薄壁零件壁厚及壁厚差测量仪的研究
9.
Analysis on Thickness of Pressure-lubricating Deep Drawing of Magnesium Alloy Cylindrical Cups
镁合金筒形件压力润滑拉深壁厚分析
10.
Thickness Homogeneity Control Technology for Aluminum Alloy Conical Parts
铝合金锥形挤压件厚度均匀性控制技术
11.
Numerical Analysis of Wall-thickness Thinning during the NC Tube Bending Process;
薄壁管数控弯曲成形壁厚变薄的数值分析
12.
Thin-Walled Part of Variable Wall Thickness Machining Modeling and Its Experimental Study
薄壁变壁厚零件切削加工建模及其实验研究
13.
Stress and deformation of filament-wound thick-wall cylinder pressure vessels
纤维缠绕厚壁柱形压力容器的应力和变形
14.
Wire-DEM on the Heavy-Thickness and Thin -Wall Alumium Alloy Special Parts
铝合金大厚度薄壁异形件的线切割加工
15.
Determination of transitional fillet radius for hydroformed workpiece under wall thickness constraint
以壁厚约束的内高压胀形件过渡圆角半径确定
16.
Study of Critical Theory about Buckling Forming of Middle Thick-walled Tube Bearing Axial Load;
中厚壁圆管轴压屈曲极限变形理论研究
17.
conical cup value
锥形杯突深冲极限值
18.
Study of the Key Problem on Sinking Forming with Middle Thick-Walled Tube and Cylindrical Cup;
中厚壁圆管及杯形件的缩径成形关键问题的研究