1.
Application of Ferrography Technology in Equipment Wearing Condition Monitoring
铁谱技术在设备磨损状态监测中的应用研究
2.
The Study on Model_Based Abrasion Method of the Remain Life Time Prediction for Machine;
基于模型的机械设备磨损剩余寿命预测方法的研究
3.
Repairing Technology Design for the Abrasion of Hoop Type Guide Rails on Heavy-duty Machines
重型机械装备环形导轨磨损后修复工艺设计
4.
General Provisions of Parts' Wear and Tear Limit and Repair in Equipment Maintenance
设备维修中零件磨损极限和修换的一般规定
5.
Some of the parts are scrapped because ofworn tooling, bad equipment, or human error.
由于工具磨损，设备损坏或人为错误而报废了一部分零件。
6.
Abstract: The friction-wear test machine is used to study friction and wear about rod-having pump system.
文摘:该摩擦磨损试验台是针对有杆采油系统进行摩擦磨损试验研究而研制的设备。
7.
The objective of using this equipment is to eliminate all these foreign matters that may damage the grinder of espresso machines when brewing.
引进这设备的目的是除去一切可能损害咖啡机磨豆装置的物质
8.
Research of Status Assessing Methods of Equipment Lubricating and Wearing Based on Oil Monitoring;
基于油液监测技术的设备润滑磨损状态评价方法的研究
9.
Dynamic Analysis and Failure Mechanism Research of the Reciprocating Machinery Parts with Wearing
往复式机械设备零部件磨损的动力学特性及故障机理研究
10.
Design and actualization of database of wear resistance materials
耐磨料磨损材料数据库的设计与实现
11.
mechanical grinding wheel forming equipment
机械式磨轮成形设备
12.
Preparation and Solid-Liquid Erosive Wear Property of Sialon-Sic Ceramic Composite
Sialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究
13.
The oxide may be sent through grinding equipment of the "hammer mill" type.
或许要使其通过“锤磨机”式的碾磨设备再次磨碎。
14.
The housing has hydraulically-actuated hinged sections front and rear which provide for easy access to the internals and the wear parts.
设备壳体的前部和后部设有铰接的液压开启部分，能提供方便到达内件和磨损件的位置。
15.
In-situ Preparation and Wear Resistance of Aligned MWNTS/PMMA Composites
定向MWNTs/PMMA的原位聚合制备及耐磨损性
16.
Wear Resistance of Nanosized SiO_2/PMMA Composites Prepared by In-situ Bulk Polymerization
原位聚合纳米SiO_2/PMMA的制备与耐磨损性
17.
Preparation and Tribological Properties of TiAl Based Alloy
TiAl基合金的制备及其摩擦磨损性能
18.
The wear test was carried on a nozzle which was made from carbides and ceramics on high pressure abrasive water-jet machine.
本文采用硬质合金和陶瓷材料制成喷嘴,在高压水设备上进行了磨损实验研究。