1.
Experimental Investigation of Cold-Formed Effect on Thick-Walled Steel Members and Analysis of the Cold-Formed Residual Stress Field;
冷弯厚壁型钢冷弯效应试验研究及冷弯残余应力场分析
2.
Experimental Study and Theoretical Analysis on Load Carrying Apacity of Cold-Formed Flexural Members with Thicknesses Less Than 2mm;
壁厚小于2mm冷弯薄壁型钢受弯构件承载力试验研究及理论分析
3.
Experimental study on behavior of cold-formed steel flexural members with thickness less than 2mm
壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
4.
Study on the Stability Behavior of Cold-Formed Steel Flexural Members
冷弯薄壁型钢受弯构件稳定性能研究
5.
Experimental Research and FEM Simulation of Ultimate Axial Compression of Cold-formed Medium Wall Hollow Steel Columns;
中厚壁冷弯钢管柱轴压承载力试验研究与分析
6.
Technical code for design of cold-formed thin-wall steel structures
冷弯薄壁型钢结构技术规范
7.
Study on diaphragms effect of cold-formed steel portal frame
冷弯薄壁型钢门式刚架蒙皮效应研究
8.
THE DEVELOPMENT OF TECHNICAL CODE OF COLD-FORMED THIN-WALL STEEL STRUCTURES
《冷弯薄壁型钢结构技术规范》的发展
9.
Experimental Research on Cold Formed Steel-OSB Floor
冷弯薄壁型钢-OSB板楼盖的试验研究
10.
Shock Resiatance Analysis on Low Cold-formed Thin-Walled Steel Structure System
低层冷弯薄壁型钢结构抗震性能分析
11.
Research on Flexural Capacity of Cold-formed Thin-wall Steel-Concrete Composite Beam;
冷弯薄壁型钢—混凝土组合梁抗弯承载性能研究
12.
Research on the Curves Versus Moment Hysteretic Behavior of Thin-walled Cold-formed Steel Beams
冷弯薄壁型钢梁的弯矩-曲率滞回性能试验研究
13.
Experimental study on bearing behavior of high strength cold-formed steel battens under bending
高强冷弯薄壁型钢受弯构件受力性能试验研究
14.
Application Study of the Industrialization of the Cold-formed Thin Wall Steel Housing;
冷弯薄壁型钢钢结构住宅的产业化应用研究
15.
Research on the Hysteretic Behavior of Cold-Formed Thin-Wall C-section Steel Members under Constant Compression and Cyclic Bending;
冷成型薄壁C型钢压弯构件滞回性能研究
16.
The Research on the Hysteretic Behavior of C-Section Column of Cold-Formed Steel
冷弯薄壁型钢C型构件滞回性能的研究
17.
Analysis on Load-Carrying Capacity of New Cold-Formed Thin-Walled Steel Roof Truss
新型冷弯薄壁型钢屋架结构承载力分析
18.
Experimental and Design Method Study on Cold-formed Channel Steel Columns with Section Thickness Less Than 2mm under Axial Compression;
壁厚2mm以下冷弯槽钢轴压柱试验与设计方法研究