1.
Three Dimensional Transient Simulation of Air-Fuel Mixture Formation in the Port Fuel Injected Gasoline Engine;
进气道喷油式汽油机油气混合过程三维瞬态数值模拟
2.
Numerical Simulation of Atomization and Combustion Based on Supersonic Inlet-channel Diesel Spray;
超音速进气道燃油喷射雾化及燃烧数值模拟
3.
Research on Electric Control Water Injection into Intake Ports of Diesel Engine in Order to Lower NOx Emission;
电控进气道喷水降低柴油机NOx排放的研究
4.
Effect of CO_2 Intake and Cylinder Injection on Diesel Quasi-Homogeneous Charge Compression Ignition Combustion
CO_2进气道和缸内喷射对柴油准HCCI燃烧的影响
5.
Remove fuel rail by gently rocking until all the fuel injectors are out of intake manifol
轻轻摇动直到所有燃油喷嘴脱离进气歧管，由此拆卸燃油轨道。
6.
Optimization and Design on Intake Systems for LJ276M EFI Gasoline Engine
LJ276M电喷汽油机进气系统设计及优化
7.
The wall film generated by the impinging sprays is the main reason of air-fuel ration control deviation under transient conditions.
由喷射燃油撞壁产生的进气道内油膜是导致过渡工况空燃比控制偏差的主要原因。
8.
Research on Water Injection into Intake Ports of Diesel Engine in Order to Lower NOx Emission;
发动机进气道喷水的研究——降低NOx排放
9.
Study on the Homogeneous Charge Compression Ignition Under Different Ported Injection Strategies
不同气道喷油策略下HCCI燃烧过程试验研究
10.
The Air Flow and Intake Port Improvement on 4112 Four Valves Diesel;
4112四气门柴油机进气流动及气道优化
11.
Then diesel fuel oil is injected or sprayed into the cylinder at the end of the compression stroke.
然后在压缩冲程即将结束时，柴油燃料被喷射或被喷雾进入气缸。
12.
Design of Intake of Engine Equipped with Carburetor for EFI Technology of Engine
化油器发动机进气歧管电喷化的设计开发
13.
Study of Methanol Injection at Intake Port to Suppress Smoke from Diesel Engine Under Accelerating Operations
进气喷甲醇降低柴油机加速冒烟的研究
14.
paint with an airbrush.
用油漆喷雾器进行油漆。
15.
The Application of CFD to Evalution and Improvement in Diesel Intake Port;
应用CFD评价和改进柴油机进气道
16.
The Application of CFD to Evaluation and Improvement in YC6T Diesel Intake Port
YC6T柴油机进气道CFD评价与改进
17.
The Position Error Analysis and Improvement of G5800 Diesel Engine Intake Port
G5800柴油机进气道位置偏差分析及改进
18.
Aviation jet engine lubricating oils
GB439-1990航空喷气机润滑油