1.
The Research on the Performance of Timed Manifold Injection Hydrogen-Fueled Engine;
进气歧管喷射式氢气发动机性能研究
2.
Clean each injector bore at intake manifol
清洁进气歧管上每个喷嘴孔。
3.
Design of Intake of Engine Equipped with Carburetor for EFI Technology of Engine
化油器发动机进气歧管电喷化的设计开发
4.
The gases pass into the exhaust manifold.
这些废气进入排气歧管。
5.
Remove fuel rail by gently rocking until all the fuel injectors are out of intake manifol
轻轻摇动直到所有燃油喷嘴脱离进气歧管，由此拆卸燃油轨道。
6.
Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
安装进气歧管（见单元11-排气系统和进气歧管）。
7.
Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
拆下进气歧管（见单元11-排气系统和进气歧管）。
8.
external air (injection) manifold
外装式空气喷射总管
9.
Remove intake manifold bolts.
拆下进气歧管螺栓。
10.
Computation of three-dimensional flow field in secondary gas injection for thrust vectoring nozzle
气体二次喷射矢量喷管三维流场计算
11.
Install charge air cooler hose to intake manifol
安装充电空气冷却油管到进气歧管。
12.
Application of gas-in via nozzle gas-assisted technology in moulds
喷嘴进气气辅技术在注射模中的应用
13.
manifold (intake and exhaust) for internal combustion, aircraft engines
歧管（进气和排气）,航空内燃机用
14.
Intake Air Sensor Location—Engine
进气歧管空气感知器—0L引擎
15.
INTAKE MANIFOLD AIR TEMPERATURE SENSOR—ENGINES
进气歧管空气温度感知器—引擎
16.
Install throttle body to intake manifol
安装节气阀体至进气歧管。
17.
Air leak between the turbocharger and the intake manifol
透平增压器和进气歧管之间空气泄漏。
18.
This vacuum, called intake-manifold vacuum, varies as the operating conditions change.
这个真空叫做进气歧管真空。这种进气歧管真空随运转情况而变化。