1.
After the inelastic phase, the distributing of plastic hinges is proper and reasonable, and the requirement of ductility design of structure is satisfied.
进入塑性阶段后，塑性铰分布合理，满足了结构延性设计的要求。
2.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
3.
Shear Capacity of Plastic Hinge Region of RC Shear Wall;
钢筋混凝土剪力墙塑性铰区受剪承载力分析
4.
The Analysis of Pile-Soil-Structure Dynamical Interaction Based on Plastic Hinge Theory;
基于塑性铰理论的桩—土—结构动力相互作用分析
5.
Quasi-Static Cyclic Tests and Plastic Hinge Analysis of RC Structural Walls
钢筋混凝土墙准静力循环试验和塑性铰分析
6.
Mechanism of Plastic Hinge and Non-linear Analysis of Prestressed Subassemblage Concrete Frame
预压装配式预应力混凝土结构框架塑性铰机理研究及非线性分析
7.
Virtual Work Method of Rectangular Two-Way Slab Considering Resistance Moment of Inclined Yield Line
考虑斜向塑性铰线抵抗弯矩的矩形双向板虚功分析法
8.
Local Buckling Check According to Eurocode-3 for Plastic-Hinge Analysis of 3-D Steel Frames
基于欧洲规范3中三维钢框架塑性铰分析的局部屈曲检验
9.
The plastic elemental stiffness matrix was derived by plastic-hinge method.
然后用塑性铰法推导了单元的塑性刚度矩阵。
10.
Experiment and Study on the Pivoted Pin Strength and the Stress Near the Pivot-Point of Articulation System of Wheel Loader
装载机车架铰接系统铰销强度及铰点附近应力分布的试验研究
11.
Yield-line Theory Application and Studying of Thin Plate Curve Problem;
薄板弯曲问题的塑性铰线法应用研究
12.
Solution Method for Anti-blast Ability of the Wall Based on Yield Line Theory
利用塑性铰线理论求解墙体抗爆能力
13.
In-Plane Nonlinear Theory and Elastic-Plastic Stability of Pined Circular Arches;
两铰圆弧拱非线性弯曲理论和弹塑性稳定
14.
The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet
摆辗镦粗工艺过程中塑性铰形成与特性研究
15.
Experimental Research and Theoretic Analysis on the Relations of Plastic Hinges and Reinforced Concrete Eccentric Beam-column Joints Connecting Spread-ended Beams;
钢筋混凝土偏心节点梁端水平加腋与塑性铰关系试验研究及理论分析
16.
Theortical Solution of Displacement and Stress of a High-rise Pile Based on Link Connection between Pile and Cushion Cap
桩-承台铰接的高承台桩位移及内力分布解析解
17.
Applied study on method of calculation of transverse load distribution for articulated slab girder bridges
铰接板梁桥荷载横向分布计算方法应用研究
18.
Study on Seismic Behavior of Beam-column Joint with Beam-end Steel Fiber Concrete Plastic Hinge;
梁端钢纤维混凝土塑性铰梁柱节点抗震性能研究