1.
Finite Element Modeling and Analyzing for Four-angle Connection Joints of Beam-to-Column in Steel Frame
钢框架梁柱四角钢连接节点有限元分析
2.
Seismic design of beam-column four-angles connections for steel frames
钢框架梁柱四角钢连接节点的抗震设计方法
3.
Effective Length Factor of Columns in Two Web and Top-seat Angle Semi-rigid Connected Steel Frames;
四角钢半刚性连接刚架柱计算长度系数
4.
Experimental study of top-seat angle with two web connection in steel frame
钢框架顶底角钢带腹板双角钢连接的试验研究
5.
Simulation Research on Top and Seat Angle with Double Web-Angles Connection;
双腹板顶底角钢连接的数值模拟分析
6.
Study on tension and block shear behavior of bolted single angle-gusset plates
单角钢螺栓连接节点板拉剪性能研究
7.
Three-phase winding, 4-wire delta connection, ungrounded or grounded.
三相绕组, 四线三角形连接, 接地或不接地。
8.
Three-phase winding, 4-wire delta connection. Ungrounded or grounded can be specified.
三相绕组，四线三角形连接。可指定不接地或接地。
9.
The Performance Research on the Beam-column Connections of Cold Bending Light-gauge Steel C Section with Angle at Bottom and Top of the Web;
顶底角钢、腹板双角钢连接的冷弯薄壁C型钢梁柱节点性能研究
10.
The Analysis of Behavior of Beam-to-column Connections Jointed by Top and Seat Angle in Steel Frame
钢框架梁柱顶—底角钢连接的节点性能分析
11.
Study on Behavior of Beam-to-column Minor Axis Connections Jointed by Double-angle in Steel Frame
钢框架梁柱弱轴双角钢连接受力性能研究
12.
Experimental research on seismic behavior of steel frame with top and seat angle with double web angles semi-rigid connections
角钢连接的半刚性钢框架抗震性能试验研究
13.
Experimental research on top and seat angle with double web angle semi-rigid connections
顶底角钢带腹板双角钢半刚性连接的试验研究(英文)
14.
"and he put horns at its four angles made of the same, plating it all with brass;"
在坛的四拐角上作四个角，与坛接连一块，用铜把坛包裹。
15.
"Put horns at the four angles of it, made of the same, plating it all with brass."
要在坛的四拐角上作四个角，与坛接连一块，用铜把坛包裹。
16.
[bbe] Put horns at the four angles of it, made of the same, plating it all with brass.
要在坛的四拐角上作四个角、与坛接连一块、用铜把坛包裹。
17.
Octagonal metallic ring gaskets for steel pipe flanges joints
GB/T9128.1-1988钢制管法兰连接用八角形金属环垫
18.
Analysis of low-cycle fatigue behavior of top-seat angle steel connections
顶底角钢连接节点的低周疲劳性能分析