1.
Finite Element Modal Analysis of the Four-cylinder Crankshaft Based on UG and ANSYS
基于UG和ANSYS的四缸曲轴有限元模态分析
2.
Structural Modal Analysis for the Crankshaft/flywheel component of a 4-cylinder IC Engine
四缸内燃机曲轴-飞轮组结构模态分析
3.
A Four-cylinder Diesel Engine Crankshaft Fracture Failure Analysis And Improvement
某四缸柴油机曲轴断裂失效分析及改进
4.
Engine Cylinder Block Crankcase
发动机气缸体曲轴箱
5.
Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).
从汽缸体上卸去曲轴（参看“汽缸体－拆卸”）。
6.
The crankcase is the lower part of the engine cylinder block.
曲轴箱是发动机气缸体较低的部分。
7.
Production of Multi-cylinder Ductile Iron Crankshaft
球墨铸铁QT850-4多缸曲轴的研制
8.
Analysis on the Multi-body Dynamics of a Multi-cylinder Engine Crankshaft
多缸内燃机曲轴系统多体动力学分析
9.
"This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders."
本节介绍曲轴、主轴承、发动机机体和气缸的维修。
10.
Design and Simulation of Fracture Splitting Machine Tool for Bearing Bracket of Engine Crankcase
发动机缸体曲轴轴承座裂解机床设计及仿真
11.
Multi-body System Dynamics Simulation of Crankshaft System in a Four Cylinder In-line Diesel Engine
直列四缸柴油机轴系动力学仿真分析
12.
Analysis on Measuring Accuracy in Inspecting Crank Angles for Six-cylinder Crankshafts
六缸发动机曲轴曲拐夹角检测方法的精度分析
13.
"The oil pan and the lower part of the cylinder Block together are called the crankcase; they enclose, or encase, the crankshaft."
油盘和气缸体的下部共同称为曲轴箱,用来封闭或罩住曲轴。
14.
The Crank Balance and Vibration Measurement on a Three-Cylinder Car Engine
三缸汽车发动机的曲轴平衡与振动测试
15.
The Study and Application of Manufacturing Crankshaft for Diesel Engine with 6 Cylinder;
六缸柴油机曲轴机械制造工艺研究及应用
16.
An Improved Technical Design for Crankshaft Shell Casting of Single-cylinder Diesel Engine
单缸柴油机曲轴壳型铸造工艺优化设计
17.
Load Calculation and Fatigue Life Analysis of Crankshaft of Quintuple Cylinders Fracturing Pump
五缸压裂泵曲轴载荷计算及疲劳寿命分析
18.
The design of a support with eccentricity for turning high-power 9 cylinders diesel engine crank pin
大型9缸柴油机曲轴连杆轴颈车削偏心扶架设计