1.
Study on Structure Property of Superpower Oil Engine Austenite Exhaust Valve Steel-3Cr23Ni8Mn3MoN;
大功率柴油机奥氏体排气阀钢3Cr23Ni8Mn3MoN钢的组织性能研究
2.
Study on the Microstructure and Performance of Austenitic Valve Steeel by Micro-Alloying;
微合金化奥氏体气阀钢的组织和性能研究
3.
General purpose industrial valves-Specification of austenitic steel castings
GB/T12230-1989通用阀门奥氏体钢铸件技术条件
4.
Microstructure and Properties of the Polynary Coatings Co-diffused on Martensitic Valve Steel
马氏体气阀钢多元共渗层的组织及性能
5.
These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials.
这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
6.
ferritic-austenitic alloy steel
铁素体奥氏体合金钢
7.
discharging valve
排出阀排气阀排水阀
8.
Krupp austenitic steel
克虏伯奥氏体不锈钢
9.
Boronizing of ZG1Cr18Ni9 austenite stainless steel
ZG1Cr18Ni9奥氏体不锈钢的渗硼
10.
a safety, exhaust valve
安全阀、 排气阀.
11.
Use a pressure reducing regulator or separate control valve to safely discharge gas from cylinders. Use a check valve to prevent reverse flow into the cylinder.
使用减压调整器或单个的控制阀来安全地从钢瓶中排出气体。采用止回阀，防止回流入钢瓶。
12.
Use a pressure-reducing regulator or separate control valve to safely discharge gas from a cylinder.
使用减压调整器或单独的控制阀门来从钢瓶内安全的排出气体。
13.
Use a pressure reducing regulator or separate control valve to safely discharge gas from cylinder.
使用减压调整器或单个的控制阀来安全地从钢瓶中排出气体。
14.
Replace the cylinder outlet seal and valve cap.
替换钢瓶排气口密封和阀门帽。
15.
steel that has enough nickel and chromium or manganese to retain austenite at atmospheric temperatures.
含有足量的镍和铬或锰以在大气温度下保持奥氏体的钢。
16.
Liquid cylinders designed to dispense gaseous oxygen have valves equipped with standard Compressed Gas Association (CGA) outlets.
设计用来输出气态氧的液体钢瓶上装有配有标准的压缩气体协会排气口的阀门。
17.
THE EFFECT OF PRIOR AUSTENITIC GRAIN BOUNDARIES ON NUCLEATION OF(225)_γ MARTENSITE IN STEELS
钢中原始奥氏体晶界对(225)_γ马氏体形核的影响
18.
Study of Continuous Cooling after Austenite Deformation of Low Carbon Bainitic Steels;
低碳贝氏体型钢变形奥氏体连续冷却研究