1.
Design of Cam and Link Pusher Based on MATLAB and Pro/E
基于MATLAB和Pro/E凸轮连杆推送机构设计
2.
The Kinetic Analysis and Dynamic Simulation of the Virtual Cam-bar Combination Mechanism
虚拟凸轮连杆组合机构的运动分析与动态仿真
3.
The characteristics and applicational features of each basic module are being analyzed as well, thus provided a foundation for type selection of cam link mechanism.
还分析了各基本模块的特性及应用特点 ,为凸轮连杆机构的型式选择提供了依据。
4.
The Analytic Design for a Kind of Constant-width Cam and Link Mechanism;
一种等宽凸轮-连杆机构的解析设计
5.
Creation and Application of the New Cam-linkage Combined Mechanism
一种新型连杆凸轮组合机构及其应用
6.
Computer Method for Cam Outline Design in Link-Cam Mechanisms
凸轮—连杆组合机构中凸轮廓形设计的计算机方法
7.
To Realize Complicated Predeterminate Curve of Points on Coupler with Cam Revisory
实现复杂的预定连杆曲线的凸轮修正法
8.
The CAD of Mechanism Combined by Cam, Linkage and Slide Based on Graphics
基于图形化的凸轮、连杆和滑块组合机构CAD
9.
Optimum Design of Fixed Cam and Connecting Bar Mechanism Based on MATLAB
基于MATLAB固定凸轮与连杆组合机构的优化设计
10.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
11.
Cam-linkage mechanism is used extensively to guide a point through a series of points on a prescribed path.
凸轮-连杆组合机构被广泛用于实现点沿给定曲线的运动。
12.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
13.
Analysis and design of transformable cam-five-bar mechanism
可变杆长的凸轮—五杆机构分析与设计
14.
In its simpler form, the mechanism consists of a cam operated lever to vibrate the back roll, called the whip roll.
比较简单的方式是机构中包括一个由凸轮控制的连杆,用以驱动后梁摆动。
15.
locking cam keeper of container end frame
集装箱端架锁凸轮杆插座
16.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
17.
Counter Design of Needle-bar Compound Cam in an Eyelet Buttonholer
圆头锁眼机针杆复合凸轮的反求设计
18.
Study on Cam Box Mechanism of LL680 Rapier Loom in High-speed Condition
LL680剑杆织机凸轮箱高速化研究