1.
Modeling and Control of Weld Geometry for Welding Rapid Prototyping Based on TIG Building-up Technology;
TIG熔焊成型中焊缝几何尺寸的建模与控制
2.
Research on the Planning of Deposit Trajectory for Welding Prototyping Based on TIG Building-up Technology;
基于TIG堆焊技术的熔焊成型轨迹规划研究
3.
Research on Data Process of STL Model on Welding Rapid Prototyping;
熔焊快速成型数据处理相关技术研究
4.
The Trajectory Layout and Automatic Programming in the Welding Rapid Prototyping;
熔焊快速成型技术中轨迹规划与自动编程
5.
Simulation of the keyhole formation during deep penetration welding using an adaptive heat source model
用自适应热源模型模拟深熔焊小孔的形成过程
6.
grooving appliance, gas-operated, of the welding appliance type
熔焊装置型气动开槽机
7.
gas-operated welding blowpipe, high-pressure-type, hand-held
气动熔焊喷焊器，高压型，手持式
8.
GMAW short-arc tack welds shall not be incorporated into the root pass.
熔化极气体保护焊-短弧点焊焊缝不能与根部焊道合成一体。
9.
Effect of Droplet Transition on Rapid Prototyping by P-MIG
熔滴过渡对脉冲熔化极氩弧焊快速成形的影响
10.
Study of Droplet Transfer and Formation s Experiment of Welding Joint in Plasma-MIG Welding;
Plasma-MIG焊接熔滴过渡及焊缝成形的实验研究
11.
Research on Prediction Model of GMAW Ignition Time
熔化极气体保护焊引弧时间预测模型
12.
Simulation of temperature field for MIG welding prototyping
MIG焊熔敷快速成形温度场数值模拟
13.
any low-fusing alloy used in cheoplasty (molding artificial teeth).
低熔点合金，用于低熔铸型（假牙成型）。
14.
A Study on Welding Robot Based Rapid Prototyping System and the Forming Principles;
基于焊接机器人的熔焊成形系统及成形规律的研究
15.
Research on Automatic Control System for Keyhole Plasma Arc Welding Penetration;
小孔型等离子弧焊熔透自动控制系统研究
16.
The Study on Metal Transfer and Operation Performance of Rutile Gas Shielded Flux-cored Wire;
钛型气保护药芯焊丝熔滴过渡及其工艺性研究
17.
An Analysis and Study of the Properties of the Matel Transfer of the Domestic Umenite Type Electrode;
国产钛铁矿型焊条熔滴过渡特性的研究
18.
High-temperature Oxidation Behavior of Deposited Metal for New Ni-base Flux-cored Wire
新型镍基药芯焊丝熔敷金属的高温氧化行为