说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 焊接细节
1.
Experimental Research on Static and Dynamic Responses of Bridge Longitudinal Truss with Typical Welded Details;
含局部焊接细节的桥梁钢桁架结构静动力响应实验研究
2.
Comparison of several fatigue design S-N curves for steel structure weld
不同标准的钢结构焊接细节疲劳设计S—N曲线比较
3.
Fatigue life assessment of welds in bridge decks using long term monitored data
基于长期监测数据的桥面板焊接细节疲劳寿命评估
4.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
5.
apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
6.
Analysis for the Welded Empty Sphere Joint with Incompletely Filled Groove Defect;
含未焊透缺陷网架焊接空心球节点应力分析
7.
Low-Temperature Toughness for Weld Joint of 400 MPa Ultrafine Grained Steel Strip
400MPa级超细晶粒钢焊接接头的低温韧性
8.
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
9.
Static Behaviour of Overlapped KT-Type SHS Joints;
直接焊接KT型搭接方管节点静力性能的研究
10.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板。
11.
Research on Strength of Welds in Overlaped RHS K(N)-joints;
矩形管K(N)型搭接节点焊缝计算研究
12.
Study on Reinforcing Methods for Welded Tubular Joints Structures
焊接管节点结构的加固方法研究(英文)
13.
Fine structure in coarse grain region of fine grained titanium alloy
细晶粒钛合金焊接接头粗晶区的精细结构
14.
This paper presents the manufacture, welding in site, quality control of the steel box beam.
叙述了该桥钢箱梁节段的制作、地焊接和装配焊接质量控制。
15.
Bearing housings welded to the tube by precision self centering automatic welding machines.
通过精密的自我调节的自动化焊接机器将轴承与钢管焊接起来。
16.
Component installation of nodes connected by bolts or welding required inspection Connections after passing before welding or fastening.
构件安装采用焊接或螺栓连接的节点,需检查连接节点,合格后方能进行焊接或紧固.
17.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
18.
The FEM Analysis of Planar KT-Type Circular Hollow Section Joints
直接焊接平面KT型圆管节点有限元分析