1.
The Research on Bearing Spacing and Bearing Stiffness of Urban Rail Transit;
城市轨道交通钢轨支承间距与支承刚度相互关系的研究
2.
The Research of Bearing Space of Steel Rail on Elevated Integrated Ballast Bed of Urban Rail Transit;
城市轨道交通高架整体道床钢轨支承间距的研究
3.
Parallel wire strands supported the precast deck every 27ft
使用平行钢丝索来支承预制拼装的桥面结构，钢索间距为27英尺。
4.
The roof and the floor systems are directly supported by horizontal beams and girders spanning the distance between the vertical columns
屋面和楼板系统直接支承在跨越竖直柱子间距的水平主次梁上。
5.
The author suggestes that the distance between the centre of gravity of rotors should and nearer bearing be more than 1/3 of span.
建议转子设计中最好将转子重心置于离最近支承的距离为支承跨距的1/3以上。
6.
Close-up coal mining stope support pressure distribution study
近距离煤层群开采采场支承压力分布规律研究
7.
Fuzzifying Optimization Calculation Of Intermediate Bearing Space of Ship s Shafting;
船舶轴系中间轴承间距的模糊优化计算
8.
Inter-government Transfer Payment and Variation in Regional Financial Gap;
政府间转移支付与地区财力差距变化
9.
Supporting Structure Design of Long Focus Space Remote Sensor
长焦距空间遥感器支撑结构设计研究
10.
Experimental Research on Carrying Mechanism of Pile and Influence on Carrying Capacity from Distance of Two Branches;
支盘桩的承载机理及盘距对承载力影响试验研究
11.
Elementary Analysis of Sustainment Modality for Preventing from Distortion in Welding Structural Part of Hydraulic Pressure Bracket
液压支架结构件焊接防变形支撑间距初论
12.
Discussion on the idler pitch of belt conveyor based on the service life of bearing
基于轴承寿命下的带式输送机托辊间距探刮
13.
Improvement of measuring device for distance between grooves of hub ball bearing(the first generation)
轮毂球轴承(第一代)沟间距测量仪器改进
14.
The maximum load , span of supports YueLong brand type cable tray must be less allowable load and span of supports .
“跃龙”品牌系列电缆桥架的最大载荷、支撑间距应小于允许载荷和支撑荷和支撑跨距。
15.
The diaphragm was clamped between two support housings.
隔膜被夹紧在两个支承套之间。
16.
No retrofit holes had been installed at the interior support.
在中间支承上没有设置止裂孔。
17.
Research on the Utmost Limit Piles Distance about Row Piles Retaining and Protecting for Deep Fundation Excavation in Chengdu Area
成都地区基坑排桩支护极限桩间距研究
18.
This model is engaged with integrated hydraulic system, which illustrates robust performance.
◆ 采用三点支承滚动导轨，消除支承间隙，提高剪切质量。