1.
Parallel Printer Driver Development in Win CE 5.0 Based on S3C2442
基于S3C2442的并行打印接口及驱动设计
2.
Research on New Multi-Locomotive Braking System Based on Can Bus;
基于并行打印接口数据采集和数据回写系统研制
3.
fast printing direct to port
直接到端口的快速打印
4.
The Interface and Programming between the Printer LQ1600K and the Microchip;
LQ1600K打印机与单片机的接口及编程
5.
Design of Interface Between MCS-51 Microcontroller Family and Micro-printer;
MCS-51系列单片机与微型打印机的接口设计
6.
Design of Micro-printer Interface Based on USB
基于USB的嵌入式系统微型打印机接口设计
7.
This port is currently in use by a printer and cannot be removed. Make sure no printer is connected to this port.
该端口正被另一打印机使用，无法删除。请确定没有任何打印机和该端口连接。
8.
Set the appropriate output options within the Printer Set Up and
在“打印机设置和打印命令”对话窗口
9.
a cable between a computer and a printer.
连接打印机和电脑的线。
10.
{The printer connection isn't working.}Check your printer connections, and then try again.
{无法连接打印机。}请检查打印机连接，再试一次。
11.
Displays the active printer and printer connection. Choose the Setup option to change the printer and printer connection.
显示活动打印机和打印机连接。选择“设置”选项可以更改打印机和打印机连接。
12.
You must connect to this printer before you can print on it. Do you want to connect to this printer and then print the selected document?
可以打印之前，您必须连接到这台打印机。您要连接到这台打印机，然后再打印所选文档吗?
13.
There is a problem accessing the printer port. Aborting print job.
访问打印机端口发生问题，正在终止打印作业。
14.
Make absolutely sure to unplug the balance from AC power before you connect or disconnect a peripheral device (printer or PC) to or from the interface port.
在将辅助仪器(打印机,计算机)与数据接口连接或者切断之前,电子天平必须断电。
15.
A network printer, or a printer attached to another computer
网络打印机，或连接到另一台计算机的打印机
16.
Connects to the selected printers and prints pending jobs.
连接到所选的打印机上并打印暂停的作业。
17.
Either there isn't enough memory to print, or the connection to the printer has been lost.
无法打印。内存不够，或者与打印机的连接中断。
18.
Returns from print preview to the editing window.
从打印预览窗口返回到编辑窗口。