1.
Modeling and Numerical Simulation on Laser Remelting and Cladding
激光熔凝和激光熔覆的数学模型及数值分析
2.
Microstructure and Property of 20CrNi Steel Roller Treated by Laser Surface Melting
激光熔凝处理20CrNi钢轧辊的组织及性能
3.
Defects in Laser Remelting Layer of AZ91D Magnesium Alloy
AZ91D镁合金激光熔凝层的缺陷
4.
Experimental Study of Laser Melting and Laser Shock on Magnesium Alloys;
激光熔凝和激光冲击处理镁合金的实验研究
5.
The micro mechanism of the laser-remelting and analyzed by thermodynamic;
激光熔凝的微观机理及热力学初步分析
6.
Influence of laser melting on microstructure and properties of 1Cr18Ni9Ti welding joint
激光熔凝对1Cr18Ni9Ti焊接接头组织和性能的影响
7.
Effect of Incident Angle on Laser Melted Layer Microstructure and Properties
入射角度对激光熔凝层组织及性能的影响
8.
Structure and Hardness of High C-Cr Roller Steel Treated by Laser Melting
激光熔凝处理高碳高铬轧辊钢的组织及硬度
9.
Corrosion Resistance of Stainless Steel for Nuclear Engineering by Laser Melting;
激光熔凝核工程结构材料不锈钢的抗腐蚀性研究
10.
Study on the Surface Oxidation Phenomenon of the AISI 304 Stainless Steel by Nd: YAG Pulsed Laser Melting
Nd：YAG脉冲激光熔凝AISI 304不锈钢表面氧化现象的研究
11.
Study of Microstructure and Properties of HVOF-CoNiCrWC Coatings by Laser Solidification
激光熔凝高速火焰喷涂CoNiCrWC涂层组织与性能的研究
12.
Study on Phase Transformation and Mechanical Properties of Roller Modified by Laser Wide Band Rapid Solidification
轧辊表面宽带激光熔凝过程的相变及力学性能研究
13.
Microstructure and Hardness of Laser Melted Layer on Bulk Cu_(60)Zr_(30)Ti_(10) Amorphous Alloy
块状Cu_(60)Zr_(30)Ti_(10)非晶合金激光熔凝层的组织和硬度
14.
fused quartz
熔凝石英, 熔凝水晶
15.
Abnormal Grain Coarsening of Laser Surface Remelting Rapidly Solidified TA15 Titanium Alloy
TA15钛合金激光表面重熔快速凝固晶粒异常粗化
16.
LASER GLAZING RAPIDLY SOLIDIFIED MICROSTRUCTURE OF DD8 SINGLE CRYSTAL Ni-BASED SUPERALLOY
单晶镍基高温合金DD8激光快速熔凝组织
17.
Microstructure of laser clad Ni-based alloy and Ni+Cr_3C_2 composite coatings
激光熔覆Ni基与Ni+Cr_3C_2合金涂层凝固组织特征
18.
Abstract: In this paper, solidification process of laser pool for compositecoating system is studied, using numerical technology.
文摘:采用数值模拟技术研究了复合涂层激光熔池凝固过程。