1.
Fatigue Crack Propagation Behavior of NZ2 Zirconium Alloy with Different Hydrogen Contents
含氢NZ2锆合金疲劳裂纹扩展行为
2.
Propagation Behavior of Fatigue Crack for Ti-1023 Alloy
Ti-1023钛合金的疲劳裂纹扩展行为
3.
Study on Fatigue Crack Propagation Behavior of a New Burn Resistant Titanium Alloy-Ti40 Alloy;
Ti40新型阻燃钛合金疲劳裂纹扩展行为研究
4.
Study on Fatigue Crack Propagation Behavior of Low Cost Titanium Alloy Ti8LC
Ti8LC低成本钛合金疲劳裂纹扩展行为研究
5.
Fatigue Crack Growth Behavior in the Al-Si Alloys Prepared Using Electrolytic Low-titanium Aluminum
电解低钛铝制备铝硅合金的疲劳裂纹扩展行为
6.
Study on Growth of Fatigue Crack of PD3 Rail Steel under Different Load Rate Condition
不同加载速率下PD3钢轨疲劳裂纹扩展行为研究
7.
Study on the Fatigue Crack Propagation Behavior and Elevated Temperature Tensile Properties of Magnesium Alloys AM50 & AZ91;
镁合金AM50、AZ91的疲劳裂纹扩展行为和高温力学性能的研究
8.
Effect of Stress Ratio on Fatigue Crack Growth Behavior of J55 Drilling Casing Steel
应力比对套管钻井用J55钢疲劳裂纹扩展行为的影响
9.
Room Temperature Creep at Crack Tip in SUS304 Stainless Steel and Its Influence on Fatigue Crack Growth;
SUS304不锈钢裂纹尖端的室温蠕变现象及其对疲劳裂纹扩展行为的影响
10.
Study on Fatigue Small Crack Propagation Behavior in TA6V Titanium Alloy;
TA6V钛合金疲劳小裂纹扩展行为研究
11.
Micro-behaviour of fatigue crack growth in welding heat-affected zone
焊接热影响区疲劳裂纹扩展的微观行为
12.
Small thermal fatigue crack propagation behavior of sprayed Al-Si/SiC_p composite for brake disc
喷射沉积Al-Si/SiC_p制动盘材料的热疲劳微裂纹扩展行为
13.
EFFECTS OF LOAD PARALLEL TO THE CRACK ON THE FATIGUE CRACK PROPAGATION RATE
平行于裂纹方向的载荷对于疲劳裂纹扩展速率的影响
14.
SHORT CRACKS GROWTH AND FATIGUE DAMAGE UNDER TWO STEP LOADING
两级载荷作用下疲劳短裂纹扩展与疲劳损伤
15.
Influence of fatigue crack tip plastic zone on crack propagation behavior in TC4ELI alloy
TC4ELI合金疲劳裂纹尖端塑性区对裂纹扩展的影响
16.
(3) In the high rowth-rate region the rate propagation of fatigue cracks isgoverned by the striation growth mechanism as ell as by the dimple mechanism.
(3)在高速率区,裂纹扩展速率行为是由疲劳条纹生长机制和韧窝机制所控制.
17.
THE EFFECTS OF PAINTING VASELINE FILMS IN CRACK TIP ZONE ON FATIGUE CRACK GROWTH
凡士林油膜对疲劳裂纹扩展的影响
18.
THE FEATURE AND MECHANISM OF FATIGUE CRACK PROPAGATION IN TOOL AND DIE STEELS
工模具钢中疲劳裂纹扩展特征与机制