说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 形成速度
1.
Knowing the con-stribution and the rate of formation and the quantity of asetes.
了解腹水的分布,以及腹水的形成速度、水量等。
2.
Where the rate of capital formation has already been raised to an overly ambitious level, the imported agricultural commodities may allow it to continue.
在资本形成速度已经达到可观的水平的国家,进口农产品将使这一速度继续下去。
3.
Study on the Method of VSP Deformable Layer Velocity Tomography
VSP可变形地层速度层析成像方法研究
4.
NUMERICAL SIMULATION OF RAPID FORMING TEMPERATURE FIELD OF 3D SURFACING
三维堆焊快速成形温度场的数值模拟
5.
Effect of extrusion speed on formation of nascent PAN hollow fiber
喷丝速度对PAN中空纤维成形的影响
6.
Simulation of temperature field for MIG welding prototyping
MIG焊熔敷快速成形温度场数值模拟
7.
Influences of Deformation and Cooling Rate on the Microstructure Evolution of T91 Heat-resistant Steels;
变形和冷却速度对T91耐热钢组织形成的影响
8.
At a rotating speed of 3. 75 rpm, the thrombus was so poorly formed that EXT could not be performed.
旋转速度为3. 7rpm时,不能形成血栓或血栓形成不良;
9.
The curve can be traced out in different directions or with different "velocities".
曲线可以从不同的方向和由不同的“速度”来形成。
10.
Temperature Measurement and Research on Microstructure Controlling in Laser Rapid Forming Process;
激光快速成形过程温度测量及组织控制研究
11.
A Brief Analysis of TSJ Prototyping Craft Precision Based on RP Technology;
基于RP技术的TSJ机快速成形工艺精度的浅析
12.
Research on the distribution of ultraviolet irradiance in an integral stereolithography system
面曝光快速成形系统中紫外光辐照度分布研究
13.
Research on Over-cured Depth in Stereolithography Process
光固化快速成形工艺中过固化深度的研究
14.
Effect of cooling rate on the formation of acicular ferrite in Ti deoxidized steel
冷却速度对Ti脱氧钢中针状铁素体形成的影响
15.
In this paper, the effect of feeding speed on peen-forming is studied thorugh experiments, which shows that chordwise peen-forming deformation is the exponential function of feeding speed.
试验研究了送进速度与抛丸成形之间的关系,结果显示,横向抛丸变形是送进速度的指数函数。
16.
"The body is ridding itself of wastes all the time. But during exercise, wastes form faster than they can be carried away."
身体一直在清除废料。但是在锻炼中,废物形成的速度超过它们被运走的速度。
17.
quadrilateral speed-time curve
四边形速度时间曲线
18.
Fast deformation velocity measurement using laser Doppler velocity interferometer
应用激光多普勒速度干涉仪测量快速形变速度